Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Centrecoat Rapid Dry Primer is a fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
Centrecoat Rapid Dry Primer is an environmentally friendly, economical, general purpose primer designed for general sheet metal fabrication and structural steel work. Rapid Dry Primer is available in black, red, grey or white, giving you a choice of decorative finish.
Best Uses
Centrecoat Rapid Dry Primeris a high build phosphate shop primer, offering quick drying times and has been developed especially for internal structural steel work, offering good corrosion resistance and resistance to sag.
Application
Centrecoat Rapid Dry Primer can be applied using brush or roller, however we would recommend the use of an airless sprayer, as the tendency to run or sag is greatly reduced when using this method. This product is touch dry after just 30 minutes and has a theoretical coverage rate of 5.6m2 per litre when applied at 180 microns WFT.
This product is recommended for direct application to steel only, rather than being applied over existing coatings.
Surface and Environment
Centrecoat Rapid Dry Primer is highly suited for application to most steel surfaces found commercially, industrially or in a construction based environment.
TECHNICAL
Features
Centrecoat Rapid Dry Primer used particularly as holding primer for internal structural steelwork and applied at 75 microns DFT, typically this would subsequently be protected with exterior cladding, or building works
Often used under intumescent coatings, subject to first checking that the intumescent suppliers data approves the use of 'use under their coating'
Ideal for airless spray application, with little tendency to run or sag
Suitable for structural steel profiles
Exhibits good corrosion resistance
Excellent sag resistance
Technical Info
Components:
One Part
Type:
High build zinc phosphate primer, based on modified alkyd resin
Finish:
Flat
Stock Colours:
Grey, Red
Tintable:
Yes, other RAL colours available on request. Please note, bespoke tints are non refundable / exchangable.
VOC Content:
382.0g per Litre
Volume Solids:
55%
Suitable Substrates:
For steel and structural steel
Application Method:
Brush, Roller, Air Atomised Spray or Airless Spray
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
