Mapei Ultraplan Renovation Screed 3240 is a fibre reinforced self levelling compound, designed for use in the refurbishment of existing floors in both commercial and domestic applications.
Mapei Ultraplan Renovation Screed 3240 can be used for interior levelling, smoothing and infilling differences in thickness from 3 to 40 mm on new or existing concrete, screeds, stone, terrazzo and ceramic tiles, old and new timber floors, floor boards, chipboard panels, plywood, parquet. For use in dry locations as an underlayment for floor finishes such as tile, stone, vinyl, carpet and wood flooring. Ultraplan Renovation Screed 3240 is suitable where good resistance to loads is required, also for wheelchair traffic and underfloor and undertile heating systems.
The substrate should be solid, free of dust, loose particles, paint, oil, gypsum residues or other contamination that could compromise the bond. Timber substrates should be clean and solidly fixed, open joints should be sealed with Mapei Planiprep Skimcoat mixed with Mapei Latex Plus. Cementitious surfaces that are not sufficiently compacted must be removed or, where possible, consolidated with Mapei Prosfas or Mapei Primer EP. Cracks in the substrate should be repaired with Mapei Eporip. The substrate should be primed with Mapei Mapeprim SP, Mapei Eco Prim Grip or Mapei Eco Prim T prior to the application of Ultraplan Renovation Screed 3240. Mapei Ultraplan Renovation Screed 3240 be hand or pump applied.
Pour a 25 kg bag of Ultraplan Renovation Screed 3240 into a bucket containing 4.25-4.5 litres of clean water and mix with a low speed electric mixer to obtain an
homogeneous, self-levelling, lump free mix. Apply in a single coat from 3 to 40 mm in thickness. To minimise aeration a spiked roller may be used. The self levelling properties of Ultraplan Renovation Screed 3240 will provide a surface ready to accept all kinds of floorcoverings.
- Theoretical Coverage: 6m2 at 3mm thickness
- Storage: 12 months in a dry place and in the original unopened packaging
- Walkable in 4-6 hours
- Colour: Grey
- Available in 25 Kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.