£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
Advanced Search
My Cart

NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces

Shop By
Filter by
  1. Price £140.00 - £149.99 Remove This Item
Clear All
Filter by

4 Items

Set Descending Direction
  1. Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip
    Sherwin Williams Macropoxy M922 - Formerly Transgard TG123 Epigrip

    A high solids, 2 pack epoxy containing micronised glass flake and anti corrosive pigments suitable for use on blast cleaned and cathodically protected...

    From £175.52 £146.27
  2. Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish
    Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish

    A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

    From £173.16 £144.30
  3. Jotun Hardtop Pro
    Jotun Hardtop Pro

    A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

    From £169.39 £141.16
  4. Sherwin Williams Macropoxy M922M - Formerly Leighs Epigrip M922M
    Sherwin Williams Macropoxy M922M - Formerly Leighs Epigrip M922M

    A high solids, 2 pack epoxy brushing and spraying mastic, pigmented with micronised glass flake, aluminium and anti corrosives.

    From £172.99 £144.16
per page
System 1 (pre-qualified) Carbon steel with maximum operating temperature < 120°C (248°F)
Structural steel
Exteriors of equipment, vessels, piping and valves (not insulated)
System 2 Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified) Internal surface of carbon steel tanks
System 4 (pre-qualified) Walkways, escape routes and lay down areas
System 5A (pre-qualified) Epoxy-based fire protection
System 5B (pre-qualified) Cement-based fire protection
System 6A Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B Hot-dipped, galvanized steel when painting is required
System 6C Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified) Carbon and stainless steel in the splash zone
System 7B (pre-qualified) Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified) Submerged carbon and stainless steel > 50°C (122°F)
System 8a

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b

Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9 Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)