Selemix Aqua 2k Single Stage Topcoat is a water based polyurethane coating which can be applied direct to suitably prepared steel - ideal for application on agricultural and plant equipment. London Underground Approved Item No.5075.
Please note, the Hardener is not included with this product. Compatible Hardener is Selemix 9-110.
Selemix 2k Single Stage Topcoat is a water based paint formulated with polyurethane which will provide a high quality finish with excellent colour retention and durability, the paint is also highly resistant to weathering, mechanical and chemical stress. It is available in a matt finish and can be tinted to most RAL, BS & NCS colour codes.
For the gloss variant, please see Selemix Aqua 8-110 2K Single Stage Gloss Topcoat.
When applied to a suitably prepared substrate 8-111 is ideal for application on to bare steel, mild steel, galvanised steel, stainless steel, aluminium, light alloys, previously coated steel, light industrial equipment, plant equipment, diggers, dumpers, excavators, rollers, roller breakers, screed pumps, generators, back hoes, street masters, power barrows, cranes, crawler cranes, good hoists, gennie lifts, lift gear, chain slings, shackles, agricultural equipment, tractors, trailers, ploughs, combine harvesters, tillers, muck spreaders, bailers, machine tools, lathes. milling machines, drill presses, fly presses, break presses, drop forgers, surface grinders, pull saws, welding machines, table saws, welfare cabins, electrical cabinets, airport ground support equipment, control panels, cars, trucks, motorcycle, steel doors, roller shutter doors, garage doors, window frames, railings, garden furniture plus many more
Selemix 8-111 is best applied either directly to suitably prepared steel or on top of an applicable Selemix primer, using as part of the aforementioned system the product is perfect for application on to mild steel, bare steel, aluminium, stainless steel, phosphate steel, galvanised steel, previously coated steel, light alloys, machine tools, lathes, surface grinders, milling machines, pull saws, table saws, welding machines, break presses, guillotines, fly presses, drill presses, agricultural equipment, trailers, combine harvesters, muck spreaders, bailers, tractors, trailers, tillers, ploughs, cars, trucks motorcycles, bicycle frames, control panels, welfare cabins, shipping containers, plant equipment, diggers, dumpers, excavators, power barrows, screed pumps, cranes, crawler cranes, lifting gear, chain slings, gennie lifts, goods hoists, railings, garden furniture, steel doors, roller shutters doors, window frames, airport ground support equipment plus many more.
For painting over ABS, PVC and PU: Perform a light scuffing with a scotchbrite pad. Degrease the surface with a suitable plastics degreaser to remove moulding oils and waxes prior painting. Before testing, it is important to test on a small hidden area as plastics can differ adhesion quality.
All substrates will need to be suitable abraded and degreased before application of 8-111, for optimum results and performance it is recommended 2 coats are applied.
Selemix 8-111 can be applied by both conventional and air assisted / airless spray equipment, when applied at a 70 micron dry film thickness has theoretical coverage of 5.2-6.4m2 per litre.
As Selemix 8-111 is a 2 pack paint it will need to be combined with Selemix Hardener 9-110 at a general ratio of 2.5 to 1, it will then need to thinned with clean water at general ratio of between 5-20% volume. Always consult the technical datasheet prior to use for the applicable ratio.
London Underground Approved Item No.5075 - The paint system meets the LU Standard S1085 for applications over small panels, and can be used in sub-surface stations.
- Part of the Selemix Aqua range of products
- 2 pack water based topcoat
- Formulated with polyurethane
- Can be tinted to most RAL, BS and NCS colour codes
- High quality finish
- Highly durable
- Weather, mechanical & chemical stress resistant
- Can be applied direct to suitably prepared steel
- Theoretical coverage of 5.2-6.4m2 per litre when applied at a 70 micron finish
- Compatible hardener Selemix 9-110
- Touch dry 5-6 hours at 20° Celsius
- Fully cured 8-9 hours at 20° Celsius
- Recoat without sanding minimum of 8 hour and maximum of 24 hours at 20° Celsius
- Store above 5° Celsius in frost free environment
- Always consult manufactures technical datasheet prior to application
- Available in 2.5, 5 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.