Blackfriar Metallic Paint is a bright metallic finish for decorating and gilding ornamental plasterwork, wood, metal railings, picture frames, models, fleur-de-lis, memorabilia & furniture.
Blackfriar Metallic Paint can be used to decorate a wide range of items and substrates to produce a metallic finish that will not go unnoticed. Blackfriar Metallic Paint is ideal for use on ornamental plasterwork, picture frames, decorations, theatre props, furniture, radiators and textured wall finishes.
- Bright metallic finish
- Fast Drying
- Interior and exterior use
Ensure surface to be coated is clean, dry, sound and free from wax, grease or any other contamination. Previously painted surfaces in sound condition should be abraded and degreased prior to application of Blackfriar Metallic Paint. Bare or new surfaces should be primed with the appropriate Blackfriar Primer.
Stir thoroughly prior to use with a broad stirrer. The product may be applied by using a soft brush, short pile roller or spray. Apply the paint as evenly as possible to maintain an overall consistent finish. Like all metallic paints the most uniform finish is achieved by spraying. Application marks can be left in the film when brushing and rollering. Do not overwork the wet paint film when brushing or rollering.
|Stock Colours:||Antique Gold, Gold and Silver|
|VOC Content:||130.0g per Litre|
|Suitable Substrates:||For plaster, metal. wood and more|
|Application Method:||Soft Brush, Short Pile Roller, Spray|
|Theoretical Coverage:||14 m2 per litre per coat|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Cleaner / Thinner:||Water. Thinning - Maximum 10% water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 500ml|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.