Rustoleum CombiColor 7300 is a smooth gloss metallic coating that acts as an anti rust primer and topcoat all in making it ideal for outdoor use on railings, garage doors, buildings and machines, where a metallic appearance is desired.
Rustoleum CombiColor 7300 is a smooth gloss metallic coating that acts as an anti rust primer and topcoat all in one and has been designed as a multi purpose product, to be used internally and externally. Not only is 7300 sag resistant and prevents visible brush strokes, it also provides good drying properties even at low temperatures for use outdoors.
Rustoleum CombiColor 7300 is best used for providing a metallic coating in white aluminium or gold, that can be used to apply a satin, matt, hammertone or wrought iron finish. This product is highly durable and weather resistant making it ideal for outdoor use on railings, garage doors, buildings and machines, where a metallic appearance is desired.
Rustoleum CombiColor 7300 is ideal for application using brush or roller but is most suitably applied by air spray for a smoother finish. Rustoleum CombiColor 7300 has a theoretical coverage rate of 9-10m2 and is touch dry after just 2 hours at 20 degrees. A second coating is recommended to produce better results and this can be applied after a 16 hour interval.
Surface and Environment
Rustoleum CombiColor 7300 is ideal for use in industrial, commercial or domestic settings for use on metal and plastic to provide a highly decorative and protective finish. In light industrial environments, Rustoleum CombiColor 7300 offers a level of anti corrosion protection but Rustoleum CombiPrimer should be applied prior to use in heavier industrial settings.
- Contains rust-inhibitive pigments and is lead and chromate free
- CombiColor Metal 7300 should be applied on bare, manually derusted or with CombiPrimer Anti-Corrosion 3369 / 3380 primed steel
- For use Plastic use 3202 Galvinoleum first
- CombiColor Metal 7300 offers corrosion protection in a light industrial environment
- For metal structures in a more aggressive industrial environment, prior application of a Rustoleum CombiPrimer Anti-Corrosion 3369 / 3380 is recommended
|Type:||Urethane modified alkyd|
|Stock Colours:||Gold and RAL 9006 White Aluminium|
|Tintable:||Yes, can be tinted to over 30,000 colours, call for more info. Please note, bespoke tints are non refundable / exchangable.|
|VOC Content:||439.0g per Litre|
|Volume Solids:||53 - 57%|
|Suitable Substrates:||For bare, manually derusted or with CombiPrimer Anti-Corrosion 3369/3380 primed steel|
|Application Method:||Brush, Roller, Air Atomised Spray|
|Theoretical Coverage:||10.3 m2 per litre|
|Wet Film Thickness (WFT):||100 microns|
|Dry Film Thickness (DFT):||55 microns|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160 or Rustoleum Thinner 7301|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 750 ml and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.