Ardenbrite Metallic Paint suitable for churches, museums, homes, radiators, iron gates, statues, picture frames, railings and street furniture.
Ardenbrite Sovereign Gold No. 8 is established as the only acceptable substitute for Gold Leaf by various historical organisations.
Ardenbrite Metallic Paint is a high quality, rapid drying, liquid metal coating suitable for internal and external use and available in 11 metallic colours, formulated by Ardenbrite. Ardenbrite Metallic Paint is regularly used in churches, museums, homes, radiators, iron gates, statues, picture frames, railings and street furniture, to name a few. Please read the technical data sheets for individual products to find out the full preparation and application methods.
Ardenbrite Metallic Paint is best used for brightening the appearance of various different substrates giving the effect of a brand new metal surface even if the surface is not actually metal itself. Available in bronzes, silvers and golds, Ardenbrite Metallic Paint is a great way of refurbishing old garden or home appliances like fences and radiators, giving them an aesthetically pleasing finish.
Ardenbrite Metallic Paint can be applied using brush, roller or conventional spray, however we would recommend using spray for a more uniform appearance. This also allows for quicker application to a larger surface area. Ardenbrite Metallic Paint is available in 0.5, 1 and 2.5 litre tubs and has a good coverage rate of approximately 12m2 per litre. After 15-30 minutes, Ardenbrite Metallic Paint will be touch dry depending on the temperature and conditions. After 1-2 hours, you will be able to apply a second coat of Ardenbrite Metallic Paint.
Ardenbrite QD Base Coat will be required for certain applications - see datasheet.
Surface and Environment
Ardenbrite Metallic Paint can be used on a large variety of different surfaces in order to produce a high quality metallic finish. Ardenbrite Sovereign Gold No. 8 is established as the only acceptable substitute for Gold Leaf by various historical organisations. Use Ardenbrite Metallic Paint on Metal primarily, as well as on plastic, paper, plaster, ceramic and smooth woods, internally or externally.
- Please read the Technical Data Sheet for the full preparation and application instructions.
- Ardenbrite Sovereign Gold No. 8 is established as the only acceptable substitute for Gold Leaf by various historical organisations.
- Use Ardenbrite Metallic Paint on Metal, Plastic, Paper, Plaster, Ceramic, Radiators etc.
- For larger areas preferred application method is by conventional spray. This will give a more uniform appearance.
- When using Ardenbrite Metallic Paint externally or in high wear areas, it is recomended that Ardenbrite Clear Glaze is applied to protect the coating.
- Solvent Based
|Stock Colours:||Deep Gold No.2, Green Gold No.3, Antique Gold No.9, Sovereign Gold No.8, Silver No.6, Bronze No.27 and Old Penny Bronze No.35.|
|VOC Content:||670g per Litre.|
|Volume Solids:||16-18% depending upon colour.|
|Suitable Substrates:||Decorative metalwork, paper, wood, plastic, ceramic, previously painted and cementitious areas.|
|Application Method:||Conventional spray for large areas. Brush or Roller for small areas.|
|Theoretical Coverage:||12m2 per litre per coat. 2 coats are recommended.|
|Dry Film Thickness (DFT):||15 microns per coat.|
|Touch Dry:||15 minutes at 20°C.|
|Recoatable:||30 minutes to 7 days for internal works. 30 minutes to 2 hours for external works.|
|Cleaner / Thinner:||Use Methylated Spirit to clean tools.|
|Shelf Life:||12 months in unopened containers at moderate temperatures.|
|Packaging:||500ml, 1 Litre and 2.5 Litre tins.|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.