FLAG Multi Purpose Metallic Primer
FLAG Multi Purpose Metallic Primer Universal Primer is suitable for use above and below the waterline on all substrates and provide a good waterproofing and corrosion resisting performance.
Flag Multi purpose metallic primer can be used on boat hulls, topsides and superstructure and suitable for GRP Fibreglass, wood, steel and ferro cement. Flag Multi Purpose Metallic Primer is also suitable as a primer or barrier coat under Flag and other traditional anti-foulings.
Best Uses
FLAG Multi Purpose Metallic Primer can be used both above and below the waterline and has been designed to be used on boat hulls, topsides and superstructure. This multi purpose primer can be used not only with Flag products but also with other traditional anti-foulings and is also suitable for use on GRP Fibreglass, wood, steel and ferro cement and provides a good waterproofing and corrosion resisting performance.
Application
FLAG Multi Purpose Metallic Primer is easy to apply and relatively quick drying. You can apply the primer using either a brush, roller or spray, and it will be dry to touch in 2 hours. This primer has an overcoating time of 6 hours.
Surfaces and Environments
When applying Flag Multi Purpose Metallic Primer make sure that the surface you are applying it to is stable, firm, dry and free of dust, sand and loose old paint as well as being dirt, grease, oil and salt free and can be applied to boat hulls, topsides and superstructure.
Features
- Flag Universal primer is suitable for above and below the waterline
- For use on boat hulls, topsides and superstructure
- Use on all substrates with good waterproofing and corrosion resisting performance
- Also suitable as a primer or barrier coat under FLAG and other traditional antifoulings
- Easy to apply and relatively quick drying
Technical Info
| Components: | One Part |
| Type: | Solvent Based |
| Finish: | Matt |
| Stock Colours: | Grey |
| Tintable: | No |
| VOC Content: | - |
| Volume Solids: | 60% |
| Suitable Substrates: | For GRP, wood, steel and ferro cement. |
| Application Method: | Brush, Roller, Conventional or Airless Spray |
| Theoretical Coverage: | 12 m2 per litre |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 2 hours at 20°C |
| Overcoatable: | After 6 hours at 20°C |
| Fully Cured: | - |
| Cleaner / Thinner: | Flag Antifouling Thinners |
| Shelf Life: | 2 years unopened in original packaging |
| Packaging: | Available in 2.5 Litres |
