Flag Anti Corrosive QD Metal Primer

SKU
id25467
UN1263 (Class: 3, Pk Grp: III)
A high build quick air-drying oxide primer for use on ferrous metals.
Available in 2.5 Litres
From £21.02 £17.52
In stock
Only %1 left
Product Description

Flag Anti Corrosive QD Metal Primer is a high build quick air-drying oxide primer for use on ferrous metals. Provides good protection prior to over coating with most solvent based finishing products.

Best Uses

Flag Anti Corrosive QD Metal Primer is suitable for a wide variety of applications where speed and ease of application are required. Compatible with Flag Hammer Finish and Flag Smooth Metal paints.

Suitable for use on internal and external structural steel.

Application

The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. Apply via brush or conventional / airless spray at a rate of 12 - 15 m2 per litre.

Technical Details
Components: Single Pack
Type: Solvent Based Air Drying Oxide Primer
Finish: Matt
Stock Colours: Red and Grey
Tintable: No
VOC Content:
Volume Solids: 60%
Suitable Substrates: Industrial internal and external structural steel and ferrous metals
Application Method: Brush, Conventional or Airless Spray
Theoretical Coverage: 12 - 15 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: 15 minutes at 20°C
Overcoatable: After 4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Xylene
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 2.5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use