Nullifire PM020 Single Pack High Build Primer

UN1263 (Class: 3, Pk Grp: III)
A fast drying, single pack modified alkyd primer for structural steel in a Nullifire intumescent paint system.
Available in 5 Litres in Red
£69.30 £57.75
In stock
Product Description

Nullifire PM020 Single Pack High Build Primer is a fast drying, single pack modified alkyd primer for structural steel in a Nullifire intumescent paint system.

Please note there is a MOQ of 2x 5 Litre tins.

Best Uses

Nullifire PM020 Single Pack High Build Primer provides corrosion protection on structural steel within a Nullifire intumescent system. PM020 is ideal for fabrication shops that need fast curing to dry and handle.

Suitable for C1 and C2 environments.


Apply using airless spray. Brush or roller application is only recommended for small areas.  Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details
Components: One Part
Type: Modified Alkyd Primer
Finish: Matt
Stock Colours: Red
Tintable: No
VOC Content: 419.0g per Litre
Volume Solids: 51%
Suitable Substrates: For structural steel
Application Method: Airless Spray, Brush or Roller
Theoretical Coverage: 10.2 m2 per litre at 50 microns
Wet Film Thickness (WFT): 68 - 98 microns
Dry Film Thickness (DFT): 35 - 50 microns
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: After 3 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Nullifire FC002 or Nullifire FC010
Shelf Life: 24 months when stored as recommended in original unopened containers
Packaging: Available in 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.