NullifireTS816WAC is a waterborne, acrylic eggshell decorative topseal. It is primarily for use with Nullifire Intumescent Basecoats on internal steelwork.
TS816WAC is primarily used with Nullifire Intumescent Basecoats on internal steelwork. Suitable for internal & semi-exposed environments it provides a top seal to protect the intumescent coating while also providing an outstanding aesthetic finish to the steelwork.
Please contact our Technical team for further advice and information before placing your order
Ensure the basecoat surface is sound, dry, clean and free from dirt and grease. If necessary rub down with wet and dry abrasive paper and then wash down with clean water and allow to dry before applying topseal. TS816WAC should be applied when the air and steel temperatures are above 5ºC and below 25ºC. The relative humidity should be below 80% with a level below 65% being ideal for drying.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- To ensure the correct thickness is applied in a uniform manner, a wet film gauge should be used.
|Type:||Waterborne Acrylic Eggshell|
|Finish:||Eggshell - Soft Sheen Washable Finish|
|Stock Colours:||White, Transparent|
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Volume Solids:||Approx 40%|
|Suitable Substrates:||Suitable for steelwork in internal and semi-exposed environments
|Application Method:||Airless Spray|
|Theoretical Coverage:||Approx 7.4m2/litre/coat|
|Wet Film Thickness (WFT):||0.125mm|
|Dry Film Thickness (DFT):||0.050mm|
|Touch Dry:||2-4 hours at 20°C|
|Hard Dry:||4 Hours at 20°C|
|Cleaner / Thinner:||Do not thin. Clean spray equipment with clean water after use|
|Shelf Life:||2 years unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.