Nullifire SC801 Intumescent Basecoat - 120 Minutes

SKU id17646 Non Hazardous
A water based, white, thin film intumescent coating for the protection of internal structural steelwork.
Available in 25 Kg
£129.00 (£154.80 Inc VAT)

Product Description

Nullifire SC801 Intumescent Basecoat is a water based, white, thin film intumescent coating for the protection of internal structural steelwork.

Best Uses

Nullifire SC801 Intumescent Basecoat is formulated to work as a system for the protection of internal structural steelwork against fire for 120 minutes. This intumescent base coat is compatible with a full range of Nullifire primers and top seals. This product also benefits from a very low VOC that can be applied with greater efficiently on site with an improved matt smooth finish.

Application

Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the datasheets found on the technical tab. Nullifire SC801 Intumescent Basecoat can be applied up to 1.2mm wet film thickness.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


Nullifire PM015 Two Pack Aluminium Epoxy Primer

Nullifire PM015 Two Pack Aluminium Epoxy Primer

A primer for problem areas and substrates before applying a suitable Nullifire intumescent system.

£81.00 (£97.20 Inc VAT)
Nullifire PM019 Primer For Blasted Steel Substrates

Nullifire PM019 Primer For Blasted Steel Substrates

A two component, anti corrosive transport primer for temporary protection of blasted steel substrates, which will be finis...

£270.00 (£324.00 Inc VAT)
Nullifire PM020 Single Pack High Build Primer

Nullifire PM020 Single Pack High Build Primer

A fast drying, single pack modified alkyd primer for structural steel in a Nullifire intumescent paint system.

£47.00 (£56.40 Inc VAT)
Nullifire TS134 Acrylic Polyurethane Top Seal

Nullifire TS134 Acrylic Polyurethane Top Seal

A high gloss, high solid polyurethane top seal for use in compatible Nullifire intumescent systems.

£66.00 (£79.20 Inc VAT)
Nullifire PM021 General Purpose Epoxy Primer

Nullifire PM021 General Purpose Epoxy Primer

An economical corrosion resistant primer for use on abrasive blasted steel as part of a Nullifire intumescent system.

£230.00 (£276.00 Inc VAT)
Nullifire TS815 Solvent Based Acrylic Top Seal

Nullifire TS815 Solvent Based Acrylic Top Seal

A single pack, eggshell decorative top seal for use with Nullifire intumescent basecoats on internal or external steelwork.

£70.00 (£84.00 Inc VAT)
Nullifire TS816WAC - High Build Topseal

Nullifire TS816WAC - High Build Topseal

Decorative Topseal for use with Nullifire Intumescent Basecoats

£58.00 (£69.60 Inc VAT)