Nullifire SC802 Intumescent Basecoat - 60 Minutes

Non Hazardous
A water based, white, thin film intumescent coating for the protection of internal structural steelwork.
Available in 5 Litre tins and 25 Kg tubs in White - PLEASE NOTE: There is a MOQ of 2 x 5L on this product.
From £59.68 £49.73
In stock
Only %1 left
Product Description

Nullifire SC802 Intumescent Basecoat is a water based, white, thin film intumescent coating for the protection of internal structural steelwork.

Please Note there is a minimum order quantity of 2 x 5 Litre tins on this product.

Best Uses

Nullifire SC802 Intumescent Basecoat is formulated to work as a system for the protection of internal structural steelwork against fire for 60 minutes. This intumescent base coat is compatible with a full range of Nullifire primers and top seals. This product also benefits from a very low VOC that can be applied with greater efficiently on site with an improved matt smooth finish.


Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the datasheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details

Please contact our technical team prior to discuss your requirements in regards fire protection internally.

Suitable Primers

Suitable Top Sealers

Technical Info

Components: One Part
Type: Water Based Intumescent Basecoat
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 1.0g per Litre
Volume Solids: 68%
Suitable Substrates: For internal structural steel
Application Method: Airless Spray, Brush or Roller
Theoretical Coverage: 1 Kg per m2 based on 0.5mm DFT
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Use water to clean equipment. Do not thin.
Shelf Life: 6 months in original unopened packaging
Packaging: Available in 5 Litres and 25 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use