Nullifire TS815 Solvent Based Acrylic Top Seal is a single pack, eggshell decorative top seal for use with Nullifire intumescent basecoats on internal or external steelwork.
Nullifire TS815 Solvent Based Acrylic Top Seal can be applied internally within a building by the application of a single coat or externally using two coats with the appropriate intumescent basecoat.
- Easy single coat application with excellent coverage
- 2010 VOC compliant product
- Attractive soft sheen washable finish
- Available in a full colour range, including most RAL & BS4800 colours
- Tested with Nullifire basecoats to ensure compatibility
Only apply Nullifire TS815 Solvent Based Acrylic Top Seal onto a fully dried Nullifire System S Basecoat. Normally this will be 3-5 days after basecoat application. Dependant upon site conditions, heavy basecoat loadings may require longer drying periods prior to the application of TS615 Topseal. The surface of the dried basecoat must be clean, free from condensation, grease or other contamination.
The ambient temperature must remain above 0ºC throughout the period of application. If Nullifire TS815 Top Seal is to be applied when the relative humidity exceeds 80%, extra care must be taken to ensure that the surface remains free from condensation and that its temperature is at least 2 ºC above dew point.
Suitable for application via brush, roller or airless spray.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
|Tintable:||Yes, to BS4800 and RAL colours. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For internal and external steel|
|Application Method:||Brush, Mohair Roller or Airless Spray|
|Theoretical Coverage:||10 m2 per litre|
|Wet Film Thickness (WFT):||0.13 mm per coat|
|Dry Film Thickness (DFT):||-|
|Overcoatable:||After 8 hours at 10°C|
|Cleaner / Thinner:||Clean equipment after use with White Spirit|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.