Nullifre PM021 General Purpose Epoxy Primer is widely used within the petrochemical, offshore and chemical industries. Nullifire PM021 is particularly recommended for use as a tie coat diluted with 40% thinners over zinc silicate and metal sprayed steel.
Nullifire PM021 is compatible with all Nullifire intumescent basecoats. Suitable for C1, C2 and C3 environments.
Apply using airless or airmix spray. Brush or roller application is only recommended for small areas. Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
|Stock Colours:||Red and Grey|
|Suitable Substrates:||For abrasive blasted steel|
|Application Method:||Airless or Airmix Spray, Brush or Roller|
|Theoretical Coverage:||10.4 m2 per litre at 50 microns|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||6 hours at 23°C|
|Overcoatable:||After 5 hours at 20°C|
|Cleaner / Thinner:||Nullifire FC002 Thinner|
|Shelf Life:||24 months when sotred as recommended in original unopened container|
|Packaging:||Available in 19.9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.
A water based, white, thin film intumescent coating for the protection of internal structural steelwork.