Owatrol Primall

UN1263 (Class: 3, Pk Grp: III)
A fast drying primer, primarily for indoor use on a range of different substrates.
Available in 1, 2.5 and 10 Litres
From £33.24 £27.70
In stock
Only %1 left
Product Description

Owatrol Primall is a fast drying interior primer, that blocks stains such as water, fire and smoke damage as well as priming difficult surfaces.

Best Uses

Primall is ideal for use on areas that are stained from water, fire, or smoke damage as well as nicotine stains, and more. It can be used on ceilings, walls, furniture, cabinets and doors. Suitable for use on a range of non-porous smooth surfaces, including Aluminium, Galvanised metal, ceramic tiles, varnish, PVC, plastic and also on porous surfaces such as cement, brick, plaster and wood.

Please note that Owatrol Primall can be used externally if the substrate is sheltered by roofing, however, it is not suitable for use on exterior facades, cinder blocks or stucco.


Owatrol Primal can be applied by either, brush, roller or airless spray. All surfaces should be cleaned and dry prior to application, and any mould should be treated with a suitable mould killer. Wash the surface with a suitable detergent, such as Owatrol Soapclean.

Primall does not need to be diluted, it should be used as is.

Technical Details

Features and Benefits

  • Adheres to smooth surfaces with no need to sand.
  • Blocks and hides staining from Water, Fire and Smoke damage, Nicotine, Food (e.g. Ketchup, Mustard), Felt Pen, and more.
  • Prevents staining of the finish coat.
  • Stabilises porous surfaces and prevents shadowing on the finish coat.
  • Can be applied to very lightly rusted surfaces as an anti-corrosion primer.
  • Improves performance of the finish and makes applying the finish easier.

Technical Info

Components: Single Pack
Type: Acrylic Resins
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 400g/L
Volume Solids: 39% ±2
Suitable Substrates: Metal, PVC, Plastic, Ceramic Tiles, Cement, Wood
Application Method: Brush, Roller, Airless Spray 
Theoretical Coverage: 10m2 per litre per coat
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 20°C

Porous Surfaces: after 1 hour at 20°C

Non-Porous Surfaces: after 2 hours at 20°C

Cleaner / Thinner: Clean all tools with White Spirits or Cellulose Thinners immediately after use
Shelf Life: See tin for shelf life and storage information
Packaging: Available in 1L, 2.5L and 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products