Teknos Timantti Stop Stain Blocking Primer

SKU
id18520
Non Hazardous
A water-borne alkyd based stain blocking primer for indoor use to cover up and fix stain discolouration.
Available in 2.7, 9 and 18 Litres in White
From £49.25 £41.04
In stock
Only %1 left
Product Description

Teknos Timantii Stop is a water-borne alkyd based stain blocking primer for indoor use to cover up and fixes discolourations caused by soot, nicotine and water damage.

Best Uses

Teknos Timantii Stop is formulated for use on previously painted and unpainted soiled concrete, stopper and building board surfaces which can not be washed or otherwise cleaned before top coating. Teknos Timantti Stop is suitable for application to walls and ceilings as well as doors, windows and other fixed furniture indoors in dry and humid spaces and in wet rooms.

Teknos Timantii Stop efficiently insulates and fixes discolourations caused by soot, nicotine and e.g. water damages. Surfaces insulation primed with Teknos Timantii Stop can be top coated with all Teknos interior paints which otherwise suit the object in question. Teknos Timantii Stop is white and full-matt and hence can be used also as a top coat e.g. on ceilings. Teknos Timantti Stop also helps prevent tannins from wood knots grinning through.

Application

Clean the surface from dirt and dust as well as possible. Wash water-resistant dirty surfaces with Teknos Rensa Super paint cleaner. Remove loose and poorly adherent coats of old paint. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with Teknos Ferrex Aqua Anti corrosive paint.

Teknos Timantii Stop is a water-borne paint. Coatings, which are not waterproof, such as old unpainted ceiling stopper or glue paint coats, must be removed before applying Teknos Timantii Stop. Alternatively Teknos Futura 3 adhesion primer can be used as an insulation primer.

Before use stir the paint thoroughly. The paint can be diluted with water, if required, but dilution may impair the insulation capability and the coverage of the paint. Apply once or twice by brush, roller or spray. Recommended nozzle size for airless spray is 0.013 - 0.017''.

Technical Details
Components: One Part
Type: Water Borne Alkyd
Finish: Full Matt
Stock Colours: White
Tintable: No
VOC Content: 140.0g per Litre
Volume Solids: 40%
Suitable Substrates: For internal walls and ceilings, wooden windows, concrete, and fixed furniture indoors
Application Method: Brush, Roller, or Spray
Theoretical Coverage: 7 - 10 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: 1 hour at 23°C
Overcoatable: After 16 hours at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: Water
Shelf Life: See side of tin
Packaging: Available in 2.7, 9 and 18 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use