Teknos TeknosPro 5 is an alkyd reinforced acrylate dispersion, full matt interior wall and ceiling paint for use on a multitude of standard building materials.
Teknos TeknosPro 5 is suitable for use on interior walls and ceilings, such as in the home or offices. It is easy to apply and gives a smooth, matt surface with attractive appearance. TeknosPro 5 can be applied to concrete, plaster, filler, brick and to various building boards. It can also be used for repainting old alkyd and dispersion paint coats.
Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. Teknos Futura 3 Adhesion Primer.
For smoothing of irregularities in the surface choose a suitable stopper from the TeknosPro series. The dried stopper is sanded down and the dust removed.
Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".
|Tintable:||Can be tinted to Teknos Interior Colours and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||30.0g per Litre|
|Suitable Substrates:||For interior walls and ceilings|
|Application Method:||Brush, Roller or Airless Spray|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||30 minutes at 20°C|
|Overcoatable:||After 1 hour at 20°C|
|Fully Cured:||After 4 weeks at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||2 years unopened in original packaging|
|Packaging:||Available in 2.7, 9 and 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.