Teknospro Binder - Dust Binder is a water-borne, colourless, acrylic-based dust binder for walls and ceilings indoors. The product has been classified in Emission Classification of building materials to Group M1.
Teknospro Binder is best used for dust binding of untreated concrete, brick, building blocks, building boards etc. indoors. Colourless Teknospro Binder does not colour or darken treated mineral surfaces. The treated surface can be over coated with Teknos water-borne indoor paints if needed.
The surface to be treated must be clean and dry. Teknospro Binder is a product which is ready to use and which can be tinted to transparent shades, if needed. This attention colouring helps to ascertain that a sufficient dust binding film has been applied. Application by brush, roller or airless spray once or twice. Suitable nozzle for airless spray is 0.013 - 0.017".
Application conditions: The surface to be treated must be dry. The temperature of the ambient air and the surface shall be above +5°C and the relative air humidity below 80%.
Approvals and Certificates
- M1 Classification
|Tintable:||Yes, to Teknos Tranparent Interior Colours tinting group and pale RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||max. 30 g/l.|
|Volume Solids:||Approx. 14 % by volume|
|Suitable Substrates:||Concrete, Brick, Building Blocks, Building Boards|
|Application Method:||Brush, Roller or Airless Spray (nozzle 0.013 - 0.017")|
|Theoretical Coverage:||10 m²/l Applied once onto a smooth surface|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Drying Time, Dust free:||30 minutes at 23°C|
|Next Treatment:||After 1-2 hours at 23°C|
|Cleaner / Thinner:||Water. Wash the equipment immediately after use with detergent and warn water|
|Storage:||Must be stored tightly closed and kept cool|
|Packaging:||Available in 5, 9 and 18 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.