Centrecoat Concrete & Brick Sealer

SKU
id14326
Non Hazardous
A acrylic water based impregnation treatment which protects by giving added strength to a concrete or brick substrate.
Available in 5 Litres
From £52.09 £43.41
In stock
Only %1 left
Product Description

Centrecoat Concrete & Brick Sealer is an acrylic water based impregnation treatment which protects by giving added strength to a concrete or brick substrate.

Best Uses

Centrecoat Concrete & Brick Sealer is formulated to assist in preventing concrete floors and brick walls from dusting. Suitable for use in warehouses, car parks, garages and manufacturing units. Suitable for both new and old concrete surfaces, but not suitable for power-floated concrete floors.

  • Water repellent, but the product is not a coating
  • Chemically resistant to mild acids and alkalis and de-icing salts
  • Retards ‘freeze-thaw’ cycle surface degradation
  • Does not affect slip resistance
  • Treated surfaces will remain moisture vapour permeable
  • Non-hazardous and non-toxic water borne product
  • Fully biodegradable
  • UV Resistant

Application

Carry out a trial application first for approval. Easy to apply via sprayer or brush. A single application is sufficient although to achieve a deeper shade then an additional application should be applied. Cracks in substrate must be repaired using a concrete/mortar repair system prior to use. Moisture content should be = or <5% to a depth of 1cm. Surface must be clean and free from dust, dirt, oil, efflorescence, organic growth and old coating films. Centrecoat Brick & Concrete Sealer may be applied using low pressure spray or brush. Ensure application is from bottom to top on vertical surfaces taking care not to let the product run. Subsequent application to be applied 5 hours after first application. Centrecoat Brick & Concrete Sealer will not perform if applied over non absorbent surfaces.

Technical Details
Stock Colours: Available in Natural (Milky), Light Grey and Buff
Tintable: No.
VOC Content: 10g per Litre.
Suitable Substrates: Brick or Concrete. Not suitable for power floated concrete floors.
Application Method: Via sprayer or brush.
Theoretical Coverage: Architectural Concrete: 8-10m2 per litre per coat. Block Pavers: 5-8m2 per litre per coat.
Recoatable: Apply wet on wet until substrate reaches 100% absorbtion.
Cleaner / Thinner: Do not thin. Clean tools with water.
Shelf Life: 24 months in unopened containers kept from frost or extreme heat.
Packaging: 5 Litre tins.

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use