Teknos TeknosPro Pohja Primer

SKU
id19699
Non Hazardous
A full matt, water-borne, acrylate-based adhesion primer for wash and wear resistant top coats on internal walls and ceilings.
Available in 18 Litres
From £98.45 £82.04
In stock
Only %1 left
Product Description

Teknos TeknosPro Pohja Primer is a full matt, water-borne, acrylate-based adhesion primer for wash and wear resistant top coats on internal walls and ceilings.

Best Uses

Teknos TeknosPro Pohja Primer is formulated as primer for dry spaces indoors, e.g. on walls and ceilings in apartments, offices, storerooms and factories. It can also be used as a top coat on ceilings and air conditioning pipes in dry spaces indoors.

Teknos TeknosPro Pohja Primer can be applied to concrete, plaster, filler, brick, wood or building boards.

Application

Clean new surfaces from dust and dirt. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash.

Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. Teknos Futura 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable stopper from the Teknos TeknosPro series. The dried stopper is sanded down and the dust removed.

Steel surfaces should be primed with Teknos Ferrex Aqua anti-corrosive paint.

Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray. Suitable nozzle for airless spray is 0.017 - 0.021".

Technical Details
Components: One Part
Type: Water Borne Acrylate
Finish: Full Matt
Stock Colours: White
Tintable: Yes, tintable to Teknos Interior Colour Card and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 30.0g per Litre
Volume Solids: 34%
Suitable Substrates: For concrete, plaster, filler, brick, wood or building boards
Application Method: Brush, Roller or Spray
Theoretical Coverage: Previously painted surface: 7 - 10m2 per litre
Filler and wood fibre board: 5 - 8m2 per litre
Concrete and plastered surface: 4 - 7m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: 30 minutes at 23°C
Overcoatable: 1 hour at 23°C
Fully Cured:
Cleaner / Thinner: Water. Wash the equipment immediately after use with water.
Shelf Life:
Packaging: Available in 18 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use