£7.50 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Teknos Futura 3 Adhesion Primer

SKU
id19461
UN1263 (Class: 3, Pk Grp: III)
A full matt multi-purpose alkyd primer that can be used both as primer, primer surfacer, adhesion primer and intermediate coating.
Available in 0.9, 2.7 and 9 Litres. Tintable to RAL and BS Colours as well Teknos inhouse colours
From £19.75 £16.46
In stock
Only %1 left
main product photo
Product Description

Teknos Futura 3 is a full matt multi-purpose alkyd primer that can be used both as primer, primer surfacer, adhesion primer and intermediate coating on a variety of wooden surfaces internally and externally and metal surfaces internally.

Best Uses

Teknos Futura 3 is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board. Also for priming of metal surfaces indoors (also light metal and galvanized surfaces) as well as glass, ceramic tiles, PVC plastic and acid-curing paints indoors. Can also be used for painting
ceilings.

Application

Clean the surface from loose matter, dirt and dust. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Remove rust from the metal surfaces with wire-brush. Remove loose and poorly adherent paint coats. Remove all possible latex paints. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.

Before use stir the paint thoroughly. For painting wooden surfaces dilute the paint if needed 5 - 10 % with Teknosolv 1621. Apply by brush, roller or spray. Suitable airless spray nozzle is 0.013 - 0.015". When applying by spray, thin the paint 5 - 15% by volume with Teknosolv 9500.

Technical Details
Components: One Part
Type: Alkyd
Finish: Full Matt
Stock Colours: White
Tintable: Yes, to RAL, BS Shades but allow for potential discrepancies with colour accuracy. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 500.0g per Litre
Volume Solids: 50%
Suitable Substrates: For is intended for priming of surfaces indoors and outdoors, such as furniture, chipboard, fibre board and gypsum board. Also for priming of metal surfaces indoors (also light metal and galvanized surfaces) as well as glass, ceramic tiles, PVC plastic and acid-curing paints indoors. Can also be used for painting ceilings.
Application Method: Brush, Roller, or Spray
Theoretical Coverage: 8 - 10 m2 per litre. On untreated chipboard expect 5 - 6m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Dust Free: 2 hours at 23°C
Overcoatable: 6 hours at 23°C
Fully Cured:
Cleaner / Thinner: Teknosolv 1621 (solvent naphtha) or in spray application Teknosolv 9500
Shelf Life:
Packaging: Available in 0.9, 2.7 and 9 Litres
Product Data Sheet (72.08 kB)
Safety Data Sheet (162.67 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use