Rensa Terrace can be used on all wooden surfaces which endure cleaning with water and are to be treated with wood oils, wood stains or exterior paints for wooden surfaces. It is a strongly alkalic detergent. It can also be used for pre-treating very dirty and chalked painted surfaces before maintenance painting.
Dilute Teknos Rensa Terrace with water depending on the purpose of its use:
For washing of and pre-treating surface to be painted: 1 : 1 (1 litre of detergent to 1 litre of water) For very dirty surfaces: use undiluted.
Wet wooden surfaces with water before applying the detergent. This prevents the detergent from absorbing too much and drying too fast. Apply the detergent to the surface to be cleaned by using either a brush or low-pressure garden sprayer. Note! Avoid splashing – the detergent may damage painted surfaces. Let it act for approx. 5 minutes.
Enhance the cleaning effect by brushing. The detergent must not dry on the surface to be cleaned - wet the surface again with the washing fluid, if needed. If the dirt is very embedded, a second treatment with Rensa Terrace may be required. Rinse the surface thoroughly with clean water. When using a pressure washer avoid excessive wetting of the wooden structures, such as weather boards and outer walls.
Let the surface dry for about 24 hours before painting or other treatment.
Rensa Terrace is environmentally friendly and biodegradable. It meets the requirements by OECD and by the Detergent regulation of European Parliament and the Council on detergents for biodegradability (OECD 301B, EC 648 / 2004).
|Application Method:||Brush or low pressure garden sprayer|
|Theoretical Coverage:||10 m² / 1 l undiluted detergent.|
|Dilution:||For washing of and pre-treating surface to be painted: 1 : 1 (1 litre of detergent to 1 litre of water). Very dirty surfaces: undiluted|
|Packaging:||Available in 1 Litre and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.