Teknos Aqua Primer 3130

SKU
id18400
Non Hazardous
A water borne industrial primer for wood designated for exterior use such as windows and doors.
Available in 20 Litres in White
From £197.76 £164.80
In stock
Only %1 left
Product Description

Teknos Aqua Primer 3130 is a water borne industrial primer for wood designated for exterior use such as windows and doors.

Best Uses

Teknos Aqua Primer 3130 is a water borne industrial primer for wood designated for exterior use such as windows and doors. Teknos Aqua Primer 3130 can be applied by Airmix or Airless spraying systems either by hand or in automated spraying facilities. Teknos Aqua Primer 3130 will typically be applied on softwood or hardwood. For non-durable hardwood and softwood we recommend a pretreatment with a Wood Preservative. Exterior durability of coating systems including Teknos Aqua Primer 3130 are typically documented according to EN 927-2.

Teknos Aqua Primer 3130 is available as opaque white, clean white or cream factory tinted shades. AQUAPRIMER 3130-00 is a highly versatile, robust and easy to use softwood and hardwood primer, which typically is used for exterior windows, doors, shutters, conservatories or wooden cladding. Teknos Aqua Primer 3130 is suitable for spray application.

Application

The wood must be clean and free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. All softwood and non-durable hardwood for exterior use should either be vacuum impregnated (only softwood) or treated with a wood preservative.

The product is delivered ready for use. Stir the product well before use.

Technical Details
Components: One Part
Type: Water Borne
Finish:
Stock Colours: Opaque White, Clean White
Tintable: No
VOC Content: 30.0g per Litre
Volume Solids:
Suitable Substrates: For external wood such as windows and doors
Application Method: Airmix (aircoat) or airless by hand or in automatic spraying equipment
Theoretical Coverage: 5 - 8 m2 per litre
Wet Film Thickness (WFT): 125 - 200 microns
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Dry To Handle: 2 - 3 hours at 20°C
Overcoatable: After 3 - 4 hours at 20°C
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: See side of container
Packaging: Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use