Teknos Woodex Classic Wood Stain

SKU
id19727
UN1263 (Class: 3, Pk Grp: III)
A solvent based alkyd transparent wood stain for outdoor use.
Available in 0.9, 2.7 and 9 Litres
From £16.18 £13.48
In stock
Only %1 left
Product Description

Teknos Woodex Classic is a solvent based alkyd transparent wood stain for outdoor use. Easy to apply and penetrates into the wood and forms a uniform film after the first application.

Best Uses

Teknos Woodex Classic protects external wood against weather strain by slowing the effects from moisture, UV radiation of the sun and soiling. Formulated for new and previously with transparent wood stain treated wooden surfaces. Ideal for log surfaces, walls, doors, window frames and fences.

Not suitable on film-forming wood stains, nor in greenhouses, hotbeds or shelters for livestock. Not suitable for indoor use.

Application

Remove all loose matter, dirt and dust with wire-brush, scrubbing brush or scraper. Wash dirty and/or mildewed surfaces with Teknos Rensa Facade façade cleaner. Rinse the surfaces thoroughly with water and allow to dry.

Stir Teknos Woodex Classic thoroughly before use and also now and then in the course of work. Apply by brush or spray. Apply the wood stain evenly and continuously on the whole length of the beam or timber to avoid making restart points. Treat end grain with special care.

Priming with Teknos Woodex Base is recommended for untreated wood. It is not recommended that clear wood stain is used alone due to restricted weather resistance.

The surface to be treated must be dry. The moisture of the wood must be below 20% of the dry weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the wood stain shall be above +5 °C  and the relative air humidity below 80%.

Technical Details
Components: One Part
Type: Solvent Based Alkyd
Finish: Not defined. The product penetrates into the pores of the timber.
Stock Colours: Clear
Tintable: Yes, to Teknos Translucent Colours and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 700.0g per Litre
Volume Solids: 18%
Suitable Substrates: For external wood
Application Method: Brush or Spray
Theoretical Coverage:

Sawn Timber: 5 - 8m2 per litre

Planed Timber and Beams: 8 - 12m2 per litre

Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry:
Overcoatable:
Fully Cured: 16 hours at 20°C
Cleaner / Thinner: Teknos TeknoSolv 1621 (solvent naphtha)
Shelf Life:
Packaging: Available in 0.9, 2.7 and 9 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use