Teknos Woodex Aqua Wood Oil is a natural oil for outdoor use for protection of garden deck floors, jetties and wooden garden furniture.
Natural oil for outdoor use for protection of garden deck floors, jetties and wooden garden furniture. Other suitable objects are fences, trellises, doors and stairs. Also for untreated, heat-treated and press-impregnated wood. Applied on clean, dry wooden surface by brush, sponge or by dipping, it protects wooden surfaces from moisture, soiling and when tinted from UV radiation of the sun. In addition it diminishes cracking of the wooden surface.
Please note this product is not suitable for greenhouses, hotbeds and shelters for livestock.
- Suitable for decking
- Tintable to over a thousand colours
Clean the surface to be treated. Rinse the surfaces thoroughly with water and allow to dry. Remove from the surface all loose and poorly adherent old matter and fluffy top layers of the wood. We recommend that untreated wood is primed with wood preservative from WOODEX-series. Remove old paint or varnish layers before the treatment.
Stir well before application. If the product is tinited this must also be stirred during the application, if needed. Applied on the surface 1 - 2 times by brush, sponge or by dipping. The wood oil can be diluted by 10 - 30% to improve the absorption. Depending on the quality of the wood, the treatment is renewed. The possible excess oil is wiped off.
The surface to be treated must be dry. The relative moisture of the wood must be below 20% of the weight of the wood. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5 °C and the relative air humidity below 80%. Painting in strong sunlight or in moist weather is to be avoided.
|Type:||Water-borne wood oil|
|Stock Colours:||Clear, Brown & Grey|
|VOC Content:||The product is not included in the EU VOC directive.|
|Suitable Substrates:||Garden Deck Floors, Jetties, Wooden Garden Furniture, Fences, Trellises, Doors and Stairs|
|Application Method:||Brush, Sponge or Dipping|
|Theoretical Coverage:||Sawn timber 5 - 8 m²/l, Planed timber 8 - 10 m²/l|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||4 hours at 23°C|
|Overcoatable:||After 16 hours at 23°C|
|Fully Cured:||24 hours at 23°C|
|Cleaner / Thinner:||Water|
|Storage:||Must not freeze|
|Packaging:||Available in 2.7 and 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.