Teknos Futura 15 is a high performance, solvent borne, quick-drying urethane alkyd paint with a semi matt finish for the painting of interior wooden and primed metal furniture.
Teknos Futura 15 is ideal for the wear resistant protection of metal and detached furniture indoors such as tables, chairs, units, wardrobes and more.
The surface to be painted must be clean. Wash previously painted surfaces with Teknos Rensa Super paint cleaner. Remove loose and poorly adherent paint coats.
Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Prime unpainted wooden, chipboard and also surfaces that have been painted with alkyd, oil or acid-curing paint with Teknos Futura 3 Adhesion primer.
Stop up pits and crevices with SILORA A Carpentry Filler. Matt down the surfaces and remove the dust. Remove loose old paint from interior metal surfaces by scraping and wire-brushing. Clean off all rust with wire-brush. Wash the surfaces with e.g. Teknos Teknosolv 1621.
|Stock Colours:||Only tints|
|Tintable:||Yes, tintable to Teknomix colours and RAL, BS Shades. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For wooden and primed metal detached furniture indoors|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||8 - 12m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||3 hours at 23°C|
|Overcoatable:||24 hours at 23°C|
|Cleaner / Thinner:||TEKNOSOLV 1621 (solvent naphtha) or in spray application TEKNOSOLV 9500|
|Packaging:||Available in 0.9, 2.7 and 9 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.