Mapei Dursilite Plus

SKU
id110808
Non Hazardous
Mapei Dursilite Plus is a hygienic internal washable water-based wall paint designed to have low dirt pick up.
Available in 5 and 20 Kg
From £33.66 £28.05
In stock
Only %1 left
Product Description

Mapei Dursilite Plus is a hygienic internal washable water-based wall paint designed to have low dirt pick up.

Best Uses

With a attractive velvety finish, Mapei Dursilite Plus has a low dirt retention capacity ideal for all types of new, old and painted internal surfaces. Ideal for well cured or cementitious, lime or gypsum render, as long as they are regular, well bonded and have no flaky or crumbly areas.

Dursilite is a antibacterial modified vinyl resin based washable matt paint in water dispersion with selected charges with good covering properties and white point for internal walls.

Some application examples

  • Painting all types of internal walls and new, well-cured or old cementitious, lime or gypsum-based render or skimming mortar, as long as they are well-adhered to the substrate and have no flaking or crumbling areas.
  • Painting rooms in private homes such as bathrooms, kitchens, sitting rooms, bedrooms, corridors and basements or in public or industrial areas, stairwells,service rooms and garages.
  • Painting old and new cementitious surfaces, including those already painted, such as the back walls of balconies, stair wells, pillars and ceilings below covered areas and internal flat roofs and parapets on terraces.

Application

Dursilite Plus should be applied 12-24 hours after a base coat if applied. Can be applied using a roller, brush or spray - please refer to datasheets prior to use.

Please note, add 2 - 2.5 litres of fresh, clean water per 20kg tub. Then thoroughly mix with an electric mix before use

Technical Details
Components: Single Pack
Type: Water thinned
Finish: Matt
Stock Colours: White
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: < 0.2 mg per m3
Volume Solids: 65%
Suitable Substrates: Protecting and decorating cementitious, lime or gypsum-based substrates to form a vapour-permeable, washable finish resistant to the growth of mould.
Application Method: Brush, Roller or Spray
Theoretical Coverage: Consumption is heavily influenced by the absorption and roughness of the substrate, the colour applied and the tools used for applications. Under normal conditions consumption is 0.3 - 0.4 kg per m2 (for two coats of product)
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Dilution Rate: 15 - 20% of water
Pot Life: -
Surface Dry:
Overcoatable: 6-12 hours at 20°C, according to humidity and temperature and, in any case, when the previous coat is completely dry
Fully Cured:
Cleaner / Thinner: Water
Shelf Life: 24 months if stored in a dry place away from sources of heat at a temperature of +5°C to +30°C. Protect from frost.
Packaging: Available in 5 and 20 Kg
Product Video

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use