This product is now discontinued. Please see PPG Nu-Klad Coating as a potential alternative.
PPG Ameron Nu-Klad 814B is a solvent free epoxy based coating which is used to protect concrete floors in the food and beverage industry, industrial and commercial warehouses, nuclear power plants, the rail industry and other industrial locations where a heavy duty, smooth and easily cleaned surface is required.
PPG Nu-Klad 814B is a smooth, protective coating for concrete floors which require regular cleaning and a high level of resistance to chemical attack. PPG Ameron Nu-Klad 814B is a solvent free epoxy based paint formulated to protect concrete and prepared power floated floors in the food and beverage industry, industrial and commercial warehouses, nuclear power plants, the rail industry and other industrial locations.
PPG Ameron Nu-Klad 814B is an industrial floor paint that provides an easily cleaned coating which can withstand daily cleaning. PPG Ameron Nu-Klad 814B cures to a smooth, glossy finish and is highly resistant to a number of chemicals including those which are commonly found in food and drinks. PPG Ameron Nu-Klad 814B resists staining caused by dirt, oil and grease and allows their easy removal.
PPG Ameron Nu-Klad 814B can be applied using a brush or roller and has a theoretical coverage rate of up to 1.33 square metres per kg, when used on porous primed concrete; or 3.3 cubic metres, when used on flat, dense, primed concrete. Ameron Nu-Klad 814B is dry to walk on after 24 hours.
Surface and Environment
PPG Ameron Nu-Klad 814B is a high quality floor coating which is designed for use in a business orientated environment, where a clean, stain free floor is essential. Spillages from chemicals, food, drink and common liquids can often be tough to remove but floors coated with Ameron Nu-Klad 814B can be easily cleaned and maintaine, saving you time and money in the long run.
- PPG Ameron Nu-Klad 814B is a high build floor coating
- Excellent wear and chemical resistance
- Smooth, cleanable surface
- Anti-Slip additive can be added for non-slip finish
- Please read the Technical Data Sheet for the full preparation and application methods
- Theoretical spreading rate from 3.3 square metres per kg onto flat and dense primed concrete up to 1.33 square metres per kg on rough and porous primed concrete
- Dry to walk on - 1 day
- Light to heavy traffic - 2 days
- Full cure 3 - 4 days