£7.75 delivery on orders excluding certain products & postcodes *

Sales & Technical 01462 421 333
Search
My Cart

Centrecoat Premium Chlorinated Rubber Line Marking Paint

SKU
id3446
UN1263 (Class: 3, Pk Grp: III)
Long lasting line paint for car parks and parking spaces as well as school playgrounds.
Available in 5 and 20 Litres (as 4 x 5 Litre Tins)
From £46.48 £38.73
In stock
Only %1 left
main product photo
Product Description

Centrecoat Premium Chlorinated Rubber Line Marking Paint is for use on bare concrete and asphalt. With fast drying properties, this paint is available in a range of standard stock colours.

Centrecoat Premium Chlorinated Rubber Line Marking Paint is designed for use on bare concrete and asphalt, has fast drying properties, abrasion resistance, and is available in a range colours.

Best Uses

Centrecoat Premium Chlorinated Rubber Line Marking Paint is for use on concrete but can also be used on aged blacktop, thermoplastic coverings, and most types of painted lines and floor paints. Centrecoat Premium Chlorinated Rubber Line Marking Paint has good chemical resisting properties which protect against oil and petrol spillages.

Application

Centrecoat Premium Chlorinated Rubber Line Marking Paint can be applied using a brush, roller or line marking machines. The use of a traffic paint line marking machine aids the application to large surface areas, whilst brush and roller application is for smaller or trickier surface areas, which require a level of accuracy. This Line Marking Paint is touch dry within 10-15 minutes and can tolerate light traffic. It reaches full cure after 4 hours.

Surface and Environment

Centrecoat Premium Chlorinated Rubber Line Marking Paint can be used in areas such as car parks, airports, parking bays, roadside parking areas, or any area where the application of lines demarcation is required. This includes internally, on areas such as indoor car parks or externally on road surfaces.

Technical Details

Features

  • A quick drying line marking paint for use on bare concrete or asphalt
  • May also be used on aged blacktop, thermoplastic coverings
  • Can be used over most existing types of painted lines and floor paints
  • Suitable for roads, car parks, parking spaces and factory floor lines
  • A trial patch is always recommended prior to use

 

  • Theoretical coverage rate is 2.85 m2 per litre, approx 50-57 linear metres of line at 5cm wide
  • Available in 5 Litres
Components: Single Pack
Type: Chorinated Rubber
Finish: Dead Matt
Stock Colours: Black, White and Yellow
Tintable: Yes, subject to order size. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 443 g/L
Volume Solids: 49%
Suitable Substrates: for concrete, tarmac, weathered black top, brick, paving, wood, asphalt, sports pitches etc
Application Method: Brush, Roller, Conventional or Airless Spray
Theoretical Coverage: 3m2 per litre or a line 75mm wide approx 44m in length.
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Touch Dry: 10 minutes at 20°C
Overcoatable:  
Fully Cured: 7 days at 20°C
Cleaner / Thinner: Clean all equipment immediately after use with 041:000:9999 thinner or 010:000:9999 Gunwash. Ensure all lines, tips,
etc. are thoroughly flushed out. It is not sufficient to leave equipment filled up with Gunwash.
Shelf Life: 12 months in unopened containers when stored under cover within the temperature range 5 - 35°C.
Packaging: Available in 5 and 20 Litres
Product Data Sheet (72.68 kB)
Safety Data Sheet (236.04 kB)

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use