Rocan PureKleen DP

SKU
id23861
Non Hazardous
A biodegradable heavy-duty cleaner and degreaser. Formulated to remove heavy contamination from porous and hard substrates including oil stains.
Available in 5 Litres
From £106.34 £88.62
In stock
Only %1 left
Product Description

Rocan PureKleen DP is a biodegradable super duty cleaner and degreaser. Formulated to remove heavy contamination from porous and hard substrates, including oil stains.

Best Uses

Rocan PureKleen DP is ideal for the for deep cleaning of unprotected stone and concrete. With superb degreasing properties, this product with remove grime and grease in one application without damaging the substrate being cleaned.

This super duty cleaner is regularly used by councils across the UK to clean floors and walls as a general cleaning agent. PureKleen DP is regularly used by Oxford City, Southampton City, Swindon, Luton, Manchester and Glasgow are immediate Local Authorities.

Rocan PureKleen DP is a versatile cleaning agent for the cleaning of Plastisol, cladding, metalwork, floors, tiles and more.

  • Deep penetration to lift even the toughest stains
  • Excellent at cleaning extreme oil and fuel stains from porous substrates
  • Superb degreasing properties
  • Water-based, biodegradable therefore low environmental impact and not subject to WEL (Work Exposure Limits)
  • Low odour so can be used on interior surfaces
  • Better results with increased exposure time
  • Removes grime and grease in one application (most cleaners only do one of these jobs)

PureKleen DP will not damage the substrate being cleaned and can be used for surface preparation prior to coating with paint products. Can be used neat or diluted with water to increase the effectiveness on thoroughly dirty surfaces.

Application

Always test apply on a small hidden portion of the substrate. Coverage rate is dependant upon level of cleaning required. Use neat or dilute as necessary for type of cleaning required. Maximum dilution ratio: 1 part product : 10 parts water. Apply by brush or spray and allow PureKleen-DP to penetrate the dirt or grease. Agitate with a stiff brush if heavy soiling.

Rinse clean with clean pressurised hot water and vacuum up with a wet & dry vacuum. For confined areas: use a low pressure hose & scrubbing brush.

Technical Details

Notes

  • Fully biodegradable
  • Use neat or dilute as necessary for type of cleaning required. Maximum dilution ratio is 1 part PureKleen-DP to 10 parts water
  • Coverage rate is dependant upon level of cleaning required
  • PureKleen-DP can be used as a light duty cleaner diluted 1:20 with fresh water. For more heavily soiled areas, dilute between 1:2 - 1:10 with fresh water.

Technical Info

Components: One Part
Type: Water based alkali
Finish: -
Stock Colours: Transparent Light Green
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: For porous and hard substrates.
Application Method: Brush, Spray
Theoretical Coverage: 8-10m2 per litre when diluted
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: -
Fully Cured: -
Cleaner / Thinner: Water
Shelf Life: Store away from frost and heat in a dry place: temperature between 5°C and 30°C. Shelf life is 24 months from the production batch date when kept in the original unopened container.
Packaging: Available in 5 Litres

Related Products