Rustoleum Hard Hat 2100 Topcoat
Rustoleum Hard Hat 2100 Aerosol can be used on bare metal, wood and concrete, and is ideal for small maintenance or touch up jobs for a multitude of projects.
Rustoleum Hard Hat Top Coat Aerosol Spray 2100 has been specifically designed for small maintenance or touch up jobs. Hard Hat Top Coat 2100 is a fast drying short oil soya alkyd based on lead and chromate free pigment. These pigments offer longer gloss and colour retention and help to create extra resistance to chipping and cracking. Hard Hat Top Coat has heat resistance for up to 100°C, although discolouration may occur above 65°C. Rustoleum Hard Hat Aerosol offers you a quick drying time of 10-15 minutes without drips or runs.
Best Uses
Rustoleum Topcoats 2100 should be used in normal humidity, interior applications and industrial exposures. Hard Hat aerosols have more in them than the standard aerosol and can and last 2-3 times longer. This means this product will go further, resulting in higher coverage rates. As well as having a longer lasting life than the average aerosol, Rustoleum Hard Hat topcoat Aerosol 2100 also offers you twice the opacity of cheaper spray cans meaning no cross layer will be required as normal coverage can be achieved in one layer.
Application
Remove the cover cap and shake vigorously for at least one minute after the rattle of the mixing ball is heard. Hold the can approximately 25cm from the surface using a back and forth motion whilst keeping the can parallel with the surface. Make sure you shake the can frequently during use. Ensure that the can is always in motion when you are holding the spray button in to avoid runs, sags and leaks occurring.
Surface/Environment
Rustoleum Topcoat Aerosols should be applied over Hard Hat Primers or properly prepared painted substrates. Rustoleum Hard hat 2100 Aerosol can be used on bare metal, wood and concrete, and is ideal for small maintenance or touch up jobs.
Features
- Rustoleum Hard Hat Aerosol Topcoats 2100 is a fast-drying short oil soya alkyd based on lead and cromate free pigment
- Ideal for small maintenance or touch up jobs
- Heat resistant up to 100°C (dry heat), above 65°C discoloration may occur
- Only available in boxes of 6 tins (9 tins if ordering a special colour)
- Bright topcoats may need a light coloured primer/intermediate coat.
Technical Info
| Components: | One Part |
| Type: | Fast drying short oil soya alkyd aerosol |
| Finish: | Gloss, Satin and Matt |
| Stock Colours: | Various See Above |
| Tintable: | Yes. 400ml aerosols and minimum order quantity is 9 tins, please call for info. Please note, bespoke tints are non refundable / exchangable. |
| VOC Content: | 640.0g - 650.0g per Litre |
| Volume Solids: | - |
| Suitable Substrates: | Should be applied over RUST-OLEUM Hard Hat 2169/2182 Primers or properly prepared painted substrates |
| Application Method: | Aerosol |
| Theoretical Coverage: | 2.5 m2 per spray can at 25 microns dry |
| Wet Film Thickness (WFT): | 100 microns |
| Dry Film Thickness (DFT): | 25 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 15 minutes at 20°C |
| Overcoatable: | Within 1 hour or after 48 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | - |
| Shelf Life: | See tin for shelf life and storage information |
| Packaging: | Available in Packs of 6x 500ml Aerosols or 9x400ml for special tints (please note these can take up to 5 working days) |
