Selemix 6-810 Waterborne Degreaser, 25 Litres

SKU
id110212
Non Hazardous
Waterbased cleaner and degreaser formulated to remove grease, oil and contaminants from substrates.
Available in 25 Litres
£334.34 £278.62
In stock
Product Description

Selemix 6-810 is a water based cleaner and degreaser formulated to remove grease, oil and contaminants from substrates before the application of Selemix water and solvent based paints.

Being water based makes 6-810 low VOC which is safer for both the environment and applicators. 6-810 is perfect for cleaning items such as bare steel, mild steel, stainless steel, previously coated steel, zinc sprayed steel, galvanised steel, light alloys, aluminium, blast cleaned steel, plus many more.

Best Uses

Selemix is best used to clean substrates before the application of Selemix paints both solvent and water based. 6-810 is perfect for cleaning mild steel, bare steel, blast cleaned steel, previously coated steel, stainless steel, ferrous steel, previously coated steel, galvanised steel, zinc sprayed steel, old finishes, aluminium, anodised aluminium, hard anodised aluminium plus many more.

Application

To use Selemix 6-810 apply to the surface using a lint free cloth, then using another clean lint free cloth remove any residue from the surface and allow to dry before applying any paint.

If applying 6-810 via sprayer or brush it is advised that rubber or PVC gloves and suitable eye protection is worn.
Always consult the manufactures data sheet prior to use.

Technical Details
  • Selemix 6-810
  • Water based degreaser
  • Low VOC
  • Can be used to clean substrates before the application of both solvent and water based Selemix paints
  • Apply via brush, sprayer or lint free cloth
  • Ensure all residue is removed and substrate is dry before apply paint
  • Always consult manufacturer’s datasheets prior to use
  • Available in 25 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.