Selemix 7-511 Polyurethane Matt Topcoat is a 2 pack paint formulated with enamel and can provide a high level of resistance from both chemical and atmospheric attack making ideal for protecting ferrous steel.
Please note, the Hardener is not included with this product. Compatible Hardener is Selemix 9-060.
Selemix 7-511 polyurethane matt topcoat is designed to be used as part of a Selemix paint system when a matt finish is required, the product is available in a large range of colours and can be tinted to most RAL, BS & NCS colour codes.
Due to its formulation this PU matt topcoat has a good resistance to both chemical and atmospheric attack making it ideal for protecting steel, galvanised steel, black steel, phosphate steel, stainless steel, previously coated steel or light alloys.
Typical applications are agricultural equipment, trailers, harvesters, tractors, ploughs, plant equipment, excavators, diggers, dumper, earthmovers, screed pumps, power barrows, cars, trucks, steel structures, steel doors, garage doors, roller shutters, machine tools, lathes, milling machines, presses, workshop equipment plus many more.
Selemix 7-511 Polyurethane Matt Topcoat is a 2 pack topcoat best used as part of a Selemix paint system to overcoat Selemix primers 7-413 & 7-414 when a matt finish is required with a good resistance to harsh atmospheric conditions and chemical attack, using as part of this system makes the 7-511 ideal for protecting galvanised steel, stainless steel, black steel, phosphate steel used in products such as cars, trucks, bicycle frames, motorcycles, steel structures, agricultural equipment, harvesters, trailers, ploughs tractors, airport ground support equipment, electrical cabinets, welfare cabins, light industrial equipment, workshop equipment, plant equipment, excavators, power barrows, screed pumps, machine tools, lathes, milling machines, drill presses, control panels plus many more.
Selemix 7-511 can be applied by both airless and conventional spray equipment and when applied at a 50 micron dry film thickness has a theoretical coverage rate of 5.2-5.8m2 per litre, for best results it is recommended that 2 coats are applied. Being that 7-511 is a 2 pack paint it will need to be combined with Selemix Hardener 9-060 at a general ratio of 4 to 1. It will also require thinning with Selemix Thinner 1-420 prior to use, always consult the manufacturers technical data sheet prior to use for applicable mix ratio.
- ISO 12944-6
- Selemix 7-511 Matt finish 2 pack Solvent based polyurethane paint
- Good resistance to chemicals
- Good resistance to atmospheric attack
- Can be tinted to most RAL, BS & NCS colour codes
- Recoatable without sanding minimum of 14 hours and maximum of 24 hours at 20° Celsius
- Touch dry 4-5 hours at 20°C
- Fully cured 12-18 hours at 20° Celsius
- Compatible primers Selemix 7-413 & 7-414
- Compatible hardener Selemix 9-060
- Compatible thinner Selemix 1-420
- Theoretical coverage of 5.2-5.8 m2 per litre when applied at a 50 micron dry film thickness
- Available in 5 and 20 Litres
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.