Sika Sikacor PUR SW

UN1263 (Class: 3, Pk Grp: III)
Sika PUR SW is a single component polyurethane alkyd high build finishing coat for steel structures.
Available in 15 Litres
From £264.00 £220.00
In stock
Product Description

Please note, this product has a 1-2 week lead time. Please contact our sales team for an updated delivery time scale.

Sika Sikacor PUR SW is a coating for steel structures which offers protection against corrosion from water and chemical substances; particularly dog fouling.

Sika Sikacor PUR SW is a single component polyurethane alkyd high build finishing coat for steel structures. Sika Sikacor PUR SW is available in 15 litre tins, in a grey or black finish.

Best Uses

Sika Sikacor PUR SW is highly recommended for the treatment of street lighting column bases. It provides protection against water and chemical (dog fouling) corrosion. With this benefit in mind, Sika Sikacor PUR SW usage is not limited to street lights and can be used on all Steel Furniture Coatings that may benefit from this form of protection.


Sika Sikacor PUR SW should be applied using an Airless Spray, Paint Brush or Paint Roller. Available in a black finish.

Surface and Environment

Sika Sikacor PUR SW has been specially designed for external use and provides excellent corrosive protection and weather resistance.Sika Sikacor PUR SW is ideal for use on the bottom of street lighting columns and other coated steel furniture, that would benefit from its protective coating.

Technical Details


  • Tested and listed by the Federal Institution for Hydraulic Engineering (BAW)
  • Tested according to NORSOK M501, Rev. 6 System Number 1

Technical Info

Components: One Part
Type: Tar Free Polyurethane Coating
Stock Colours:

Black, Red Brown (Approx RAL 7032), Approx RAL 9002

Slight colour deviations are possible due to raw material characteristics

Tintable: Other colour shades upon request. Please note, bespoke tints are non refundable / exchangable.
VOC Content:
Volume Solids: 72%
Suitable Substrates: For steel and old coatings on steel
Application Method: Airless Spray recommended, brush possible but beware of DFT
Theoretical Coverage: 2.55 m2 per Kg
Wet Film Thickness (WFT): 280 microns
Dry Film Thickness (DFT): 200 microns
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: Between 4 and 6 hours at 20°C
Fully Cured: Depending on thickness, air humidity and temperature, full hardness is expected within 1 week
Cleaner / Thinner: Sika Thinner S only
Shelf Life: Minimum 6 months in original sealed containers in a cool and dry environment
Packaging: Available in 15 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.