Sika Sikafloor 327

SKU
ID21520
Non Hazardous
A two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin.
Available in 20 Kg
From £326.39 £271.99
In stock
Only %1 left
Product Description

Sika Sikafloor 327 is a two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin. Part of Sika Comfortfloor System PS-27.

Best Uses

Sika Sikafloor 327 is a tough-elastic smooth wearing course for the Sika Comfortfloor® Tough system, Sikafloor® Smooth Tough Elastic PU for Industrial flooring and Sikafloor® Broadcast Tough Elastic PU for Industrial flooring for improved friction.

Sika Sikafloor 327 is particularly suitable for hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open plan offices, museums and light to medium heavy industrial use. For interior use only.

  • Very low VOC emission
  • Solvent free
  • Good mechanical resistance
  • Easy to apply
  • Easy to maintain
  • Flexible and tough-elastic
  • Economical
  • Possible slip resistant surface

Sika Sikafloor 327 may only be used by experienced professionals.

Application

The surface must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by vacuum. Pull off strength shall not be less than 1.5 N/mm2. If in doubt apply a test area first.

Prior to mixing, stir part A mechanically. When all of part B has been added to part A, mix continuously for 2 minutes until a uniform mix has been achieved. To ensure thorough mixing pour materials into another container and mix again to achieve a consistent mix. Over mixing must be avoided to minimise air entrainment. Sikafloor®-327 must be thoroughly mixed using a low speed electric stirrer (300 - 400 rpm) or other suitable equipment.

Prior to application, confirm substrate moisture content, relative humidity and dew point. Sikafloor®-327 is poured and spread evenly by means of a serrated trowel or pin rake. When used in a self smoothing system, roll in two direction with a spike roller to ensure even thickness and to remove entrapped air.

 

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

Technical Details

Approvals

  • Synthetic resin screed material according to EN 13813:2002, Declaration of Performance 02 08 01 04 040 0 000010 1041, certified by notified factory production
    control certification body 0620, and provided with the CE marking
  • Coating for surface protection of concrete according to EN 1504-2:2004, Declaration of Performance 02 08 01 04 040 0 000010 1041, certified by notified factory
    production control certification body 0620, and provided with the CE marking
  • Reaction to Fire classification according to EN 13501- 1. Test institute Ghent University, Belgium. Report No. CR-13-167/1 for the Sika Comfortfloor® Tough

Systems

Sika Comfortfloor® PS-27

Technical Info

Components: Single Pack
Type: Polyurethane
Finish:
Stock Colours: Just tints
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: < 500 g/L
Volume Solids: 100%
Suitable Substrates: For use as part of the Sika Comfortfloor PS-27 system
Application Method: Serrated Trowel, Pin Rake, Spike Roller
Theoretical Coverage: 1.4 Kg per m2 per mm
Wet Film Thickness (WFT): See system sheet
Dry Film Thickness (DFT): See system sheet
Induction Time: -
Pot Life: 20 minutes at 20°C
Surface Dry: See system sheet
Overcoatable: See system sheet
Fully Cured: See system sheet
Cleaner / Thinner: Clean all tools and application equipment with Sika Thinner C immediately after use. Hardened and / or cured material can only be removed mechanically.
Shelf Life: 12 months from date of production in original unopened containers.
Packaging: Available in 20 Kg

Related Products