Mapei Silancolor Primer, 10 Kg

SKU
id10262
Non Hazardous
A silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.
Available in 10 Kg
£113.72 £94.77
In stock
Product Description

Mapei Silancolor Primer is a solvent free silicon resin based primer in water dispersion to be used to regulate the absorption of the substrate before applying Silancolor Paint.

Best Uses

Silancolor Primer with Silancolor Paint coloured finishing makes up a painting system for interiors/exteriors that ensures the protection of wall surfaces from chemical aggression, U.V. rays and moisture in general, maintaining the transpiration of the substrate and high water permeability which cannot otherwise be obtained with other traditional painting cycles.

Application

Silancolor Primer is a ready-to-use water-repellent silicone resin-based paint in water dispersion for external applications used as a primer for wall surfaces before applying the Silancolor Paint finishing coat, for regulating the absorbency of the substrate and as a bonding promoter. Silancolor Paint is applied using conventional methods: brush, roller, spray or airless on the special dry Silancolor Primer. Silancolor Primer is odourless, does not contain solvents and can be applied in closed or not well ventilated areas.

New surfaces that need to be treated or any reparations with repair mortars must be cured, perfectly clean, well bonded and dry. Completely remove any traces of oils or grease on the surfaces and any loose parts. Seal cracks and repair damaged concrete with mortars from the Mapegrout range. Close pores and level any uneven parts of the substrate with Monofinish or Mapefinish. Apply Silancolor Primer.

Technical Details
Components: Single Pack
Type: Silicon Resin in Water Dispersion
Finish:  
Stock Colours:  
Tintable: No
VOC Content:  
Volume Solids: 12%
Suitable Substrates: Walls
Application Method: Brush, Roller or Spray
Theoretical Coverage: 100 to 150 g/m²
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Surface Dry:  
Overcoatable: After 12-24 hours at 20°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: See container
Packaging: Available in 10 Kg

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use