Sports-Cote Court Binder Acrylic

Non Hazardous
A single pack water based acrylic designed for application to porous macadam-based sports surfaces.
Available in 20 Litres
£142.64 £118.87
In stock
Product Description

Sports-Cote Court Binder Acrylic penetrates the substrate and cures to form a strong yet flexible film within the interstitial spaces of the macadam, without affecting porosity.

Sports-Cote Court Binder Acrylic's water-based nature means that the material has an innocuous odour, it is hazard-free to apply and does not contribute to bitumen-bleed. The material also contains agents to prevent algal and fungal attack.

Best Uses

Sports-Cote Court Binder Acrylic is applied to older macadam surfaces when fretting is evident. It is used to consolidate and reinforce prior to the application of Sports Coatings’ paints. The Binder may also be used to treat new macadam surfaces to minimise the softening effect of elevated temperatures. In addition this treatment also serves to optimise adhesion between the substrate and subsequent paint coats, thereby extending the service life of the paint.


Ensure to wear gloves during application.

Sports-Cote Court Binder Acrylic can only be applied via airless spray. Recommend tip size is 30-36. Application techniques do vary. However, using a hand held spray gun or lance Sports-Cote Court Binder should be sprayed in a systematic manner, usually in strips and with suitable overlap to achieve uniform coverage.

Technical Details

Sports-Cote Court Binder Acrylic should only be applied in fine, dry weather. The substrate temperature should be higher than 10°C and likely to remain so for 4-5 hours after application. Substrate temperatures above 30°C should also be avoided.

Technical Info

Components:  Single Pack
Type:  Water Based
Finish:  -
Stock Colours:  -
Tintable:  No
VOC Content:  -
Suitable Substrates:  Macadam surfaces
Number of Coats:  One
Application Method:  Heavy Duty Airless Spray
Theoretical Coverage:

 New macadam: 6m2/litre

 Old macadam: up to 3m2/litre

Drying Time:  Approximately 1 hour at 20°C
Cleaner / Thinner:  No Thinning Required
Shelf Life:  6 months in original unopened packaging
Packaging:  Available in 20 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products