Centre-Court Premium Tennis Court Paint can be used in Sports environments such as Leisure Centres and Parks.
Centre-Court Premium Tennis Court Paint is a single pack water based coating designed for application to porous macadam Tennis Surfaces. Centre-Court Premium is formulated using water-based polyurethane and acrylic resin technology It provides an environmentally safe coating with the essential player/surface interaction characteristics that meets current standards.
Centre-Court Premium Tennis Court Paint is best used to provide a decorative and protective finish to Tennis Courts and transforms worn out and shabby courts into fresh and new looking surfaces that users will enjoy playing on. Centre-Court Premium Tennis Court Paint has excellent waterproofing qualities and protects against harsh weathering and abrasion. Centre-Court Premium Tennis Court Paint needs to withstand constant foot trafficking as players move around the court constantly. This paint works well at resisting the impact of friction.
Prior to use, ensure to use a good fungicidal wash such as Centrecoat GS36 to remove any green algae and spores that may be present. This will ensure that the tennis court paint will adhere to the substrate be it painted or unpainted.
Centre-Court Premium Tennis Court Paint can be applied using a brush, roller or airless spray and can be used as an undercoat before the application of Centre-Court Line Marking Paint. Centre-Court Premium Tennis Court Paint is available in a range of colours that are commonly used on tennis and other sports courts. A normal coat size is 625 square metres, including run off. The usual requirement for this size of court is 11 x 20 litre tubs. This would normally provide a two coat coverage for an average size court.
From experience we estimate that the average tennis court will require 6 x 20 litre tins to paint the run off and 5 x 20 litre tins to paint the play area when applied by roller, please note DO NOT pour the paint on to the surface and spread it out it must be applied evenly by roller.
The easiest way to repaint your tennis court is by mask your existing lines prior to painting the play area. To do this you will need approximately 7 rolls of 50mm x 50m of masking tape to cover the 516ft (157.29 linear metres) of line. By doing this it will make the repainting of the lines much simpler!
For an indepth guide, please see our article: How To Apply Tennis Court Paint
Centre-Court Premium Tennis Court Paint is a single pack water based coating which is designed for application to porous macadam tennis surfaces. Centre-Court Premium Tennis Court Paint provides an environmentally friendly coating with a polyurethane and acrylic blend. With excellent anti-slip properties, it will help to protect players against injuries and accidents. Centre-Court Premium Tennis Court Paint is also fungi and algae resistant, providing protection for outdoor courts which are exposed to moisturous conditions.
Important: Prior to use of tennis court paint ensure to use a good fungicidal wash such as Centrecoat GS36 to remove any green algae and spores that may be present. this will ensure that the tennis court paint will adhere to the substrate be it painted or unpainted.
The easiest way to repaint your tennis court is by mask your existing lines prior to painting the play area. To do this you will need approximately 7 rolls of 50mm x 50m of masking tape to cover the 516ft (157.29 linear metres) of line. By doing this it will make the repainting of the lines much simplier!
|Type:||Water Based Polyurethane/Acrylic Blend|
|Stock Colours:||Standard Blue, Black, Brick Red, Dark Green, Standard Green, RAL 1014, Wimbledon Green, Wimbledon Purple|
|Tintable:||Yes, to most RAL colours. Please call for more info. Please note, bespoke tints are non refundable / exchangable.|
|Suitable Substrates:||For porous macadam tennis courts|
|Application Method:||Spray gun or Lance|
6 - 8 m2 per Litre per Coat (average court size is 625 m2 including run offs
3 - 4 m2 per Litre is the paint requirement for a two coat application
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Touch Dry:||2 - 4 hours at 20°C|
|Fully Cured:||72 hours at 20°C|
|Cleaner / Thinner:||Can be thinned with cool, clean water up to a maximum of 10% by volume. Note that accurate metering is
essential to ensure a uniform finish.
|Shelf Life:||12 months unopened. Store above 5°C in an environment safe from frost.|
|Packaging:||Available in 20 Litres Single Tins or As Package Deal (11 x 20L + 5L White For Line Marking)|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.