Tikkurila Temaprime EUR

UN1263 (Class: 3, Pk Grp: III)
A fast drying anti-corrosive primer for steel surfaces.
Available in 3 and 10 Litres
From £33.00 £27.50
In stock
Only %1 left
Product Description

Tikkurila Temaprime EUR is a single component, fast drying, anti-corrosive primer for steel surfaces which are exposed to weathering.

Best Uses

Temaprime EUR is recommended for use on steel structures, construction, agricultural and other machinery. It is also suitable for use without any topcoat on steel surfaces in dry indoor areas.


All surfaces must be clean and dry before application.

Steel surfaces should be blast cleaned to at least grade Sa2. Clean small damages by tool cleaning to St2. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Primed surfaces should have all oil, grease, salt and dirt removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4). 

Suitable finishing coats: Temalac, Fontecryl and Fontelac.

Technical Details
Components: Single Pack
Type: Solvent Based
Finish: Matt
Stock Colours: Reddish brown (TVT 4000) and grey (TVT 4001)
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 440 g/l
Volume Solids: 51 ± 2 %
Suitable Substrates: Metal
Application Method: Brush, Airless Spray or Conventional Spray
Theoretical Coverage: 12m/litre @ 40µm
Wet Film Thickness (WFT): 80 µm
Dry Film Thickness (DFT): 40 µm
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 23°C
Overcoatable: 40 minutes at 23°C
Cleaner / Thinner: Thinners 1006 and 1053
Shelf Life: See tin for shelf life and storage information
Packaging: Available in 3 and 10 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products