Centrecoat Wet Look Treatment is a Colour Enhancing Protector, a water and stain repellent product used on porous stone to produce a wet look finish to natural stone, concrete, terracotta, cement and self-locking paving.
Centrecoat Wet Look Treatment is a water repellent and stain repellent product used on porous stone to produce a wet look finish. Centrecoat Wet Finish Paint is an all in one product offering both water and oil repellent protection to all porous building materials, and is particularly suited for flooring and Patio's. Centrecoat Wet Look Treatment can be used inside and outside on all porous materials such as natural stone, concrete, terracotta, cement and self-locking paving. Centrecoat Wet Look Treatment is part of our extensive range of Patio Paints designed for use in Home and Garden environments.
Centrecoat Wet Look Paint is an environmentally friendly, completely water borne product that is non-toxic and does not contain solvents or silicone. Centrecoat Wet Look Treatment is designed to protect all porous materials against water and oil penetration and all kinds of stains. Wet Look Treatment is best used as a Patio Paint to offer the surface a decorative wet look finish, with better protective qualities than conventional Patio Paints.
Centrecoat Wet Look Treatment is available in 1 and 5 litre containers and can be applied using a roller to achieve the desired effect. Make sure you shake the container well before use and use neatly without dilution. Always ensure the surface is clean, dry and free from loose debris and annoying contaminants. To accentuate the wet look, you may add a second or third coating but do not over apply the product. Always make sure you allow at least 2 hours drying time before you apply the next layer to allow for ultimate penetration into the surface.
Surface and Environment
Centrecoat Wet Look Paint can be used inside and outside on all porous materials such as natural stone, concrete, terracotta, cement and self-locking paving. CentreCoat Wet Look delivers a wet look finish to the treated surface that brings up the surfaces true colour. As well as this, it also provides UV resistance and does not fade or lose colour over time.
- An environmentally friendly, completely water-borne product that is non-toxic and does not contain solvents or silicone
- It is designed to protect all porous materials against water and oil penetration and all kinds of stains
- Non film-forming impregnation treatment that leaves the treated surface both air and water vapour permeable
- Offers a permanent matt wet-look finish to the treated surface and brings out the true colour.
- It is also UV resistant and does not discolor over time
- A surface treated with Wet Look makes for easier up keep and helps solve the main causes of deterioration such as atmospheric pollution, grease-based stains and penetration of liquids
|Type:||Water-borne fluoropolymer dispersion|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For architectural concrete, natural stone, block paving, granite|
|Application Method:||Low Pressure Sprayer, Roller, Brush|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Overcoatable:||The treated surface requires product to be applied to saturation, either in one application or in two applications ‘wet-on-wet’. Remove excess product with a soft cloth.|
|Fully Cured:||7 days at 20°C. For the optimum performance: allow 5 to 7 days (avoid high pressure, steam cleaning and graffiti removal until this period has elapsed.|
|Cleaner / Thinner:||Clean tools and equipment immediately after use with water|
|Shelf Life:||24 months in unopened containers above 5°C|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.