Zinsser Ceiling Pro 5-in-1
Zinsser Ceiling Pro 5-in-1 is based on ground-breaking paint technology that effortlessly provides a perfectly finished ceiling every time. It adheres to any surface, seals stains (including water and smoke stains), primes and finishes whilst bridging hairline cracks.
Best Uses
Zinsser Ceiling Pro 5-in-1 is a water-based flat matt paint coating that contains a biocide that protects the dried coating against fungal degradation, Pro 5-in-1 will also prolong the life of your ceiling once painted. Ceiling Pro 5-in-1 has been specially formulated as not only a primer but also to seal the plaster, block most stains as well as filling small hairline cracks leaving a new look to your ceiling like no other product on the market.
The unique formulation of Ceiling Pro is unlike any other product available with it unique qualities of not only offering stain blocking properties but also filling cracks, and providing a flat matt finish that is non-yellowing in one.
Application
Stains sealed with Zinsser Ceiling Pro 5-in-1 are recoatable in just one hour 1 hour, along with Zinsser’s low odour and ultra low VOC content this product is proving to be a real problem solver.
Features
- Zinsser Ceiling Pro 5-in-1 contains a biocide
- Protects the dried coating against fungal degradation
- Prolonging the life of your painted ceiling
- 5-in-1 Primes, seals, stain blocks, finishes & covers cracks, Like no other product on market
- No other products offer stain blocking properties alongside filling cracks or stain cover & finish in one
- Stain sealer
- Non yellowing
- Low odour
- Ultra low VOC content
- Will cover over & bridge hairline cracks in the surface of the plaster
Technical Info
| Components: | One Part |
| Type: | Water Based |
| Finish: | Matt |
| Stock Colours: | White |
| Tintable: | No |
| VOC Content: | 5.0g per Litre |
| Volume Solids: | 40% |
| Suitable Substrates: | For ceilings |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | 10m2 per litre |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 40 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 30 minutes at 20°C |
| Overcoatable: | 1 hour at 20°C |
| Fully Cured: | 4 hours at 20°C |
| Cleaner / Thinner: | Water |
| Shelf Life: | 2 years in unopened containers |
| Packaging: | Available in 2.5 Litres |
