FLAG Anti-climb Paint is a thick black glutinous coating. In appearance it is similar to smooth gloss paint when applied but remains slippery indefinitely so preventing any intruder from gaining a foothold. It is very difficult to remove from clothing. Anti-climb paint continues to work in hot or cold weather conditions adhering to the surfaces to which it is applied. London Underground Limited LUL Reg No.1952
Note: As a lawful requirement do not apply under 2m height, users must erect a warning sign after Anti Climb has been applied. FLAG Anti-Climb Paint has a theoretical coverage of 2.5 litres per sq. metre.
Anti Climb (non-drying) Paint is a thick jelly type paint that is suitable for Brick, Cement, Wood, Metal, Roof Tiles and most Building Materials. Anti Climb Paint does not dry The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. Apply using a Stiff Brush, Trowel or by hand wearing protective gloves. Anti Climb Paint removel is carried out by applying solvent, normally white spirit to the existing anti climb paint. This will make it easier to remove.
We are asked if it is possable to buy clear anti climb paint the answer is no. Flag Anti Climb Paint is available only in black. If you require other colours the Coo-Var C264 Vandalene Anti-Climb Paint is available in Black, Green, Red and Grey. White Anti-Climb Paint is not avaiable.
|Type:||Anti Climb Non Drying Paint|
|Suitable Substrates:||For Exterior Brick, Cement, Wood, Metal, Roof Tiles and most Building Materials|
|Application Method:||Stiff Brush, Trowel|
|Theoretical Coverage:||2.5 m2 per litre|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||White Spirit|
|Shelf Life:||2 years unopened in original containers|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.