Axalta ViterPrime 035 Primer / Finish

Axalta ViterPrime 035 Primer / Finish is a fast drying, high build alkyd zinc phosphate primer, for airless spray in-shop application to blast cleaned structural steelwork.

Best Uses

Axalta ViterPrime 035 Primer / Finish is formulated for use as a primer or primer/finish for structural steelwork.

• Excellent build properties and hold-up on edges
• Can be overcoated with ViterThane PLV and PLS two pack polyurethane finishes
• Readily available in a wide range of BS and RAL colours
• Can be used as a base coat for most thin film intumescent coatings

Application

Preparation

All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams. Blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns.

Application

Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.

Apply via airless spray, brush or roller.