Teknos Ferrex Combi
Teknos Ferrex Combi is a water-borne anti-corrosive semi-matt paint for direct to metal application. Available in a huge range of stock colours, tintable to thousands of shades.
Best Uses
Teknos Ferrex Combi is a water-borne tintable anti-corrosive paint for priming, top coating and one layer painting for nearly all unpainted and previously painted metal surfaces internally and externally.
This product provides excellent adhesion to metal and painted surfaces, as well as good weather and wear resistance.
- Suitable for application to metal in corrosivity categories C4 and C5
- Excellent anti-corrosive properties
- Good weather resistance
- Excellent colour and gloss retention
Teknos Ferrex Combi is suitable for application onto metal surfaces indoors and outdoors such as sheet-iron roofs, metal cladding, metal balconies,playground furniture, roof ladders, metal fencing, doors, windows, pillars, beams, fixed and detached metal furniture.
Suitable metals include steel and iron surfaces, zinc-coated steel, galvanized sheet steel (roof and facade sheets), aluminium and copper.
Also this product is suitable as a topcoat for metal primed or previously painted with acrylate, alkyd, polyurethane, epoxy and polyester binder based paints or coatings.
Application
STEEL AND ALUMINIUM SURFACES:
Surfaces to be painted are cleaned from dirt, grease, oil and other impurities. Teknos Rensa Steel washing agent, solvent wiping etc. is used for cleaning. Loose and poorly adherent paint or coating is removed. Rust is removed from the surfaces (preparation grade St2) using wire brushing or other suitable method.
PREVIOUSLY PAINTED METAL SURFACES:
Surfaces are cleaned from dirt, grease, oil and other impurities. Teknos Rensa Roof washing agent, solvent wiping etc. is used for cleaning. Loose and poorly adherent paint or coating is removed. Rust is removed from the surfaces (preparation grade St2) using wire-brushing or other suitable method.
PLASTIC COATED ROOF AND WALL SURFACES:
Can be used for touch-up painting of rusted areas. Rust is removed from the surfaces (preparation grade St2) using wire-brushing or other suitable method. The edge of the cleaned area and solid paint layer is sanded smooth in order to ensure adhesion of the top coat. Sand the old painted surfaces matt from the areas, which will be touch-up painted with Teknos Ferrex Combi.
Suitable Topcoats
Water-borne outdoor paints, e.g. Teknos Kirjo Aqua paint for sheet-iron roofs, Teknos Nordica house paints, Teknos Visa opaque wood stain, Teknos Siloksan Facade silicone emulsion paint, Teknos Siloksan Anti-Carb protective paint.
In outdoor objects where particularly good mechanical resistance is required use Teknos Teknodur Combi 3430 polyurethane paint.
Furniture paints for indoor use: paints from Teknos Futura Aqua series. Water-borne interior paints, e.g. paints from Teknos Biora, Teknos Teknospro and Teknos Timantti series and Teknos Teknofloor Aqua floor paint.
| Components: | Single Pack |
| Type: | Water-Borne |
| Stock Colours: | Grey S 4500-N and Black S 9000-N |
| Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| Suitable Substrates: | Various metal surfaces, such as iron, steel, zinc-coated steel, galvanized sheet steel (roof and facade sheets), aluminium and copper. Metal surfaces previously painted or primed with acrylate, alkyd, polyurethane, epoxy and polyester binder based paints or coatings. |
| Cleaner / Thinner: | Clean up with warm water and Teknos Rensa Brush Cleaner. Wash the equipment immediately after use. |
| Shelf Life: | See container. |
| Packaging: | Available in 2.7 and 9 Litres |
| VOC Content: | 140 g/l |
| Application Method: | Brush or Spray |
| Theoretical Coverage: | 8 - 10m2 per litre |
| Finish: | Semi Matt |
| Touch Dry: | Approx 1 hour at 23°C |
| Volume Solids: | 43% |
| Overcoatable: | Approx 8 hours at 23°C |
| Wet Film Thickness (WFT): | 117 - 350 microns |
| Dry Film Thickness (DFT): | 50 - 150 microns |
