Centrecoat 2 Pack PU Hygiene Coating

SKU
id17350
Non Hazardous
A water-based satin gloss 2K hygienic polyurethane for a very durable and colour fast finish on metal or wood.
Available in 2.5 and 5 Litres
From £97.31 £81.09
In stock
Only %1 left
Product Description

Centrecoat 2 Pack PU Hygiene Coating is a water-based satin gloss 2K polyurethane for a very durable and colour fast finish on metal or wood. This product is suitable for application onto wood unlike standard epoxy systems.

Best Uses

Centrecoat 2 Pack PU Hygiene Coating is intended for application on substrates which are coated with existing paints or primers. Ideal for doors, stairs, furniture, and as a topcoat for epoxy and acrylic systems as a hygienic coating. Centrecoat 2 Pack PU Hygiene Coating assures appropriate protection against solvents, moderate alkalines, weak acids and chemical cleaning. Especially recommended where general urethane performance like excellent weather resistance (UV), easy cleaning and abrasion resistance is required.

Application

Remove grease, oil and all other surface contamination using alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Sand previous coatings that are in good condition to remove gloss and to roughen the surface slightly. Assure that the previous coating is compatible with the Centrecoat 2 Pack PU Hygiene Coating by making a test application. Remove bad adhering coatings by scraping, wire brushing or sanding. (Spot) prime. The surface must be clean and dry during application.

Add activator gradually to base material and mix with a mechanical mixing device. Do not dilute during the pot-life. Do not use after 2 hours. Do not store residue of mixed product in a closed can.

Technical Details
Components: Two Part
Type: Water Based Polyurethane
Finish: Satin
Stock Colours: Only Tints
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 35.0g per Litre
Volume Solids: 37%
Suitable Substrates: For metal or wood
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 6.2 m2 per litre at 60 microns
Wet Film Thickness (WFT): 110 microns
Dry Film Thickness (DFT): 40 microns
Induction Time: 5 minutes at 20°C
Pot Life: 2 hours for a 5 litre mix at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: After 24 hours at 20°C
Fully Cured: 2 days at 20°C
Cleaner / Thinner: -
Shelf Life: 2 years for base, 1 year for activator unopened
Packaging: Available in 2.5 and 5 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use