Centrecoat Fast Dry Undercoat Primer is a fast drying, anti-rust coating for protecting new, bare or slightly rusted metal surfaces.
Centrecoat Fast Dry Undercoat Primer is ideally used prior to a decorative coating on new, bare or manually de-rusted metal. This high quality metal primer from provides excellent adhesion in addition to providing long lasting protection against rust and corrosion.
Centrecoat Fast Dry Undercoat Primer is primarily intended form brush application but can also be applied by roller or air spray. It is available in 5 litres in grey.
Surface and Environment
Centrecoat Fast Dry Undercoat Primer is designed for use on new, bare or slightly rusted, or manually de-rusted steel surfaces. Centrecoat Fast Dry Undercoat Primer should be used in general industrial exposures, normal humidity and interior applications and should be re-coated with a suitable decorative topcoat.
|Suitable Substrates:||For new or prepared rusted steel surfaces to provide and enhance protection against corrosion|
|Application Method:||Brush, Roller or Air Atomised Spray|
|Theoretical Coverage:||Approx 12.8 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||Approx 80 microns|
|Dry Film Thickness (DFT):||Approx 35 microns|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 2 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||White spirit|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.