Centrecoat Reemat Fibreglass Fleece

Non Hazardous
Fibreglass Fleece used to add strength and bridge cracks for liquid roof and box gutter coatings.
Available in Solvent Based. Sold in 1m and 10m Lengths as well as Rolls
From £8.96 £7.47
In stock
Only %1 left
Product Description

Centrecoat Reemat Premium is glass fibre reinforcement scrim to increase tensile strength for roofs and walls.

Best Uses

Centrecoat Reemat Premium is a roll of glass fibre reinforcement to increase tensile strength for wall and roof coatings. The addition of the Reemat Premium to the embedment coat will help bridge cracks and gaps, but will remain extremely elastomeric.


Centrecoat Reemat Premium can be used for total coverage to reinforce roofs or walls, or can be applied in strips (normally 100mm wide) over joints. Reemat is easily moulded around corners, ventilation pipes, expansion joints and is ideal for most details.

When a heavier grade Reemat is required, we would suggest the use of the Reemat 225 for solvent based available with a feather edge to help reduce bumps where the matting joins. 225 Gms Matting is designed for use in the Decothane Omega 15, Gamma 20 Delta 25 roofing systems as well as the inverted roof and balcony systems.

Technical Details
  • Reemat 225 is designed for the Decothane roofing system, Also used as part of the Sika Liquid Plastics RoofPro - Formerly Sikalastic 618 roofing system. Also was part of the Scotchkote 661-662 system
  • Use with Rustoleum Dacfill HZ
  • Use to add strength to roof and box gutters coatings
  • When ordering please allow a minimum 25mm of 50mm for overlapping 
  • Approx 950mm wide.

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Related Products