A high quality finishing coat suitable for application by brush or roller.
Available in 5 and 20 Litres. Tintable upon request.
3. Select a Qty
As low as:
£75.56
Inc VAT£90.67
As low as:
Inc VAT
PRODUCT DETAILS
Centrecoat PU Gloss Brushing Finish is a high quality gloss finishing coat which is suitable for application by brush or roller. It offers durability, film hardness and resistance to cleaning chemicals. Manufactured from high performance urethane alkyd resins and high-grade pigments.
Best Uses
Centrecoat PU Gloss Brushing Finish is suitable for use on canal boats, commercial vehicles and other articles where a high quality appearance is required.
Application
The recommended application method is by brush or roller, however Centrecoat PU Gloss Brushing Finish can also be applied by spray. Please contact our Technical Team, for further information if you intend to spray apply this product.
Centrecoat PU Gloss Brushing Finish should be applied to a suitably prepared, primed or undercoated surface.
Ensure any old paintwork, is cleaned by removing loose and flaking paint, plus any oil or greasy residues, dust, scale, rust, etc. These substrates should then be lightly flatted, to give a smooth surface with an adequate key, before application.
Note, if recently applied primers or undercoats are denibbed/flatted, then an extended period should be allowed for the surface to recover. Failure to follow this instruction could result in surface defects such as ‘lifting’ or ‘crazing’.
TECHNICAL
Features and Benefits
High quality brushing gloss finish
Excellent coverage
Can be applied by brush or roller
Suitable for narrow boats and the transport industry
Technical Info
Components:
Single Pack
Type:
PU High Opacity Brushing Finish
Finish:
Full Gloss
Stock Colours:
Post Office Red, Golden Yellow, Lt/Mid/Deep Brunswick Green, Midnight Blue, Oxford Blue, Light Ivory, Pure White, Jet Black
Tintable:
Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:
Below 420 grams per litre
Volume Solids:
Typically 54%, varying slightly with colour.
Suitable Substrates:
Well prepared sound old paintwork
Application Method:
Brush, Roller, Airless Spray or Conventional Spray
Theoretical Coverage:
13.3 square metres per litre
Wet Film Thickness (WFT):
75 µm
Dry Film Thickness (DFT):
40-54 µm
Induction Time:
-
Pot Life:
-
Touch Dry:
3-4 hours at 20°C
Overcoatable:
Overnight
Fully Cured:
7 days at 20°C
Cleaner / Thinner:
This product is supplied ‘ready for use’ for application by brush. Clean tools with Cladding Protect Gunwash
Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.
Press to skip carousel
