Centrecoat R11 Salt Neutraliser Concentrate

Centrecoat R11 Salt Neutraliser Concentrate is a powerful efflorescence remover that does not require neutralisation after use.

Best Uses

Centrecoat R11 Salt Neutraliser Concentrate is efficient in removing cement, concrete and mineral deposits by de-structuring cement and mineral deposits on all substrates. This product is far less hazardous than citric, hydrochloric and phosphoric acid based products. Formulated as a consequence of increasing demands put on users in terms of safety, compliance, impact on the environment and sustaining treated substrates, unlike traditional acid products. Not classified as corrosive and is biodegradable and totally inert to all surfaces (does not damage glass, metal and plastic, and is non corrosive).

Capable of removing cement, concrete and mineral deposits on fragile substrates such as metal (including steel and aluminium), glass, rubber and gloss paints, without changing their appearance. Ideal for mineral substrates and does not change the surface porosity.

Application

Always test apply on a small hidden portion of the substrate before applying. 

For Lightly Contaminated Surfaces

Dilute Centrecoat R11 Salt Neutraliser Concentrate at a rate of 1:25 with clean water. Apply at a rate of 5m2 per litre via brush or garden spray. Leave to work for 1 hour.

Reapply solution. Leave up to 24 hours for effective removal of salts in the substrate. Wash surface salts away with a dilution of 1:50 salt remover to water. Use a stiff brush or power jet. Leave to dry. Treat the surface with a suitable sealer once fully dry.

Important Note: The purpose of this product is to draw all of the salt out from the substrate, therefore, the surface can initially look worse as the salt is brought to the surface. It is important to continue applying the Salt Neutraliser until all of the salt has been drawn out.